Menu
Get a Quote

ServerLIFT SL-500FXL™ Extended Height Lift

Front-Loading, Deep Rack Support

The ServerLIFT SL-500FXL™ Extended Height Lift is optimal for data centers, manufacturers, test labs, and system integrators and other facilities using racks up to 11’ 6” in height, with wider aisles, lots of space, or obstacles in front of the rack. Equipped with all of the features of the ServerLIFT SL-500FX® front-loading lift, the SL-500FXL™ unit has a unique front-loading configuration, allowing for support up to 11.5″ (29.2 cm), or 20″ (50.8 cm) when used with the FE-3X™ attachment, into the rack.

Spec Sheet
Operator's Manual
SL-500FXL Extended Height Lift

                         *Domestic orders only

DATA CENTER APPLICATIONS

Data Center Labs icon

Data Center Labs

Preconfigured Racks icon

Preconfigured Racks

500-lb Weight icon

Regular Moves up to 500 lbs.

Deeper Support, Stability, and Versatility

The ServerLIFT Front-Loading SL-500FXLTM is the only safety-certified data center lift capable of supporting equipment as it is extended up to 20″ deep into the rack. The forward-sliding platform accommodates both fixed-rail and face-mounted installs with optimal stability and visibility. It will even traverse ramps and floor gradients (max. angle of 6 degrees.)

Footprint (WxLxH): 24.54 x 44.08 x 93 inches
Weight (unloaded): 672lb (305 kg)

Shipping Dims (WxLxH): 26.5 x 45 x 102 inches
Shipping Weight: 795lb (361 kg)

Works for Any Data Center Design

The ServerLIFT SL-500FXLTM device features a durable built-in Easy Glide Shelf that moves forward to allow for precise server positioning. Micro-leveling SmartTILT™ shelf adjustment allows for precise forward-angle alignment and easy installation even with servers up to 500 lbs (227 kg). The enhanced maneuverability and reach of this machine makes it the lift of choice for installs into pre-populated server racks or pre-configuring server racks on pallets.

Get A Quote

Safety Is Our Top Priority

ServerLIFT® server handling lifts are designed to be the data center professional’s safest and smartest decision. Ours is the only data center lift certified to meet US and global safety standards.

Vector Smart Object-1
Vector Smart Object
IC-logo-white

Danger in the Data Center​

“Manual material handling is the principal source of compensable injuries in the American workforce, and four out of five of these injuries will affect the lower back.”
– Occupational Safety and Health Administration

“Over 36% of injuries involving missed workdays were the result of shoulder and back injuries…lifting loads over 50 pounds will increase the risk of injury.”
– US Bureau of Labor

No More Manual Lifting

IT equipment manufacturers typically specify using two to four people for handling and installation. Even with four people, manually lifting equipment unnecessarily increases the risk of accident. Manual lifting also delays other critical data center tasks from being performed.

bad lifting technique
SL-500FX sliding servers off of shelf and into rack

Save Time and Money with ServerLIFT®

Installing servers and related IT equipment by hand is both dangerous and inefficient. Depending on the number of people used to install equipment, data center efficiency can improve by up to 300% when using ServerLIFT® devices instead.

Two salaried employees installing a new piece of rack-mounted equipment weighing 75 pounds*, by hand, provides a perfect example. This task requires 30+ minutes of high-tension work per employee, risking muscle strain, pinched fingers, and other injuries. Conversely, a single tech using a ServerLIFT® data center lift can make the move in 15 minutes with no risk involved.

* mounted to the rack—no cabling or connections
Get A Quote
30 Day Money Back Guarantee

The ServerLIFT® Guarantee

The SL-500FXL™ Extended Height Lift is backed by a worry-free, 30-day Money-Back Guarantee.

30 Day Money Back Guarantee

SL-500FXL™ Extended Height Lift FEATURES

Heavy Duty, Micro-Leveling Platform

The platform of the SL-500FXL™ Extended Height Lift stays rigid and stable, even when supporting up to 500 lbs (227 kg) of equipment. When fully raised, it safely lifts servers up to 137″ high.  This, along with the user-controlled  SmartTILT™ platform angle adjustment feature, provides the critical front-to-back, level alignment needed to precisely rack-mount any server, making installation a breeze.

Front-Loading Usability

The SL-500FXL™ Extended Height Lift features a unique forward-sliding platform enabling up to 11.5″ (29.2 cm) of extended support into the rack (20″ [50.8 cm] when used with the FE-3XTM attachment as shown). Along with deeper support into the server cabinet, the user also achieves greater maneuverability of equipment for precise positioning with to up to 3.4″ of platform angle tilt adjustment.  

Swivel Handles Turn Easily​
As reported by one of our customers: "In 15 minutes, we racked an HP chassis and 15 new hard drive enclosures, with only one engineer. Using our new lift is much safer and quicker than using 3 engineers."
As reported by one of our customers: "In 15 minutes, we racked an HP chassis and 15 new hard drive enclosures, with only one engineer. Using our new lift is much safer and quicker than using 3 engineers."
Dual-Point Stabilizer Brake​
The proprietary ServerLIFT® brake system prevents any movement when transferring equipment on or off the platform, holding the entire machine rigid and stable.
The proprietary ServerLIFT<sup>®</sup> brake system prevents any movement when transferring equipment on or off the platform, holding the entire machine rigid and stable.
Large Swivel Casters​
The large front and back caster wheels roll easily over any obstruction and won’t mark up data center flooring. The front casters can be locked for easy transport down straight hallways and aisles.
The large front and back caster wheels roll easily over any obstruction and won’t mark up data center flooring. The front casters can be locked for easy transport down straight hallways and aisles.
Compact Design​
The lift’s slim 24-inch (61 cm) base and oversized wheels smoothly navigate aisles, corners, and ramps while providing ample space for an operator — even in the narrowest of data center aisles. ServerLIFT®’s unique mast design keeps the retracted lift height low enough to fit through standard-size doorways and elevators.
The lift’s slim 24-inch (61 cm) base and oversized wheels smoothly navigate aisles, corners, and ramps while providing ample space for an operator — even in the narrowest of data center aisles. ServerLIFT<sup>®</sup>’s unique mast design keeps the retracted lift height low enough to fit through standard-size doorways and elevators.
Telescoping Mast​
When fully extended, the mast lifts the platform equipment surface 137" high to reach the highest racks (higher when used with the PL-500X Riser attachment). As an added safety feature in height-restricted environments, the TouchSTOPⓇ overhead sensor prevents both structural and equipment damage by stopping the lift motor on contact with the ceiling or other overhead obstructions.
When fully extended, the mast lifts the platform equipment surface 137" high to reach the highest racks (higher when used with the PL-500X Riser attachment). As an added safety feature in height-restricted environments, the TouchSTOPⓇ overhead sensor prevents both structural and equipment damage by stopping the lift motor on contact with the ceiling or other overhead obstructions.
Fully Powered Lifting​
Capable of operating more than a full day on a single charge, the SL-500FXL™ Front-Loading Powered Lift features a non-hydraulic, heavy-duty winch motor and a leak-proof AGM (Absorbed Glass Mat) battery that are safe for use in any data center environment. The unit comes equipped with the choice of a 110V or 220V 3-stage charging system.
Capable of operating more than a full day on a single charge, the SL-500FXL™ Front-Loading Powered Lift features a non-hydraulic, heavy-duty winch motor and a leak-proof AGM (Absorbed Glass Mat) battery that are safe for use in any data center environment. The unit comes equipped with the choice of a 110V or 220V 3-stage charging system.
Fine Adjustment Pendant
Controls the speed to allow fast positioning and precise alignment of equipment to rails and other equipment-mounting solutions in data center racks and cabinets.
Controls the speed to allow fast positioning and precise alignment of equipment to rails and other equipment-mounting solutions in data center racks and cabinets.
Get A Quote

FUNCTIONAL ATTACHMENTS FOR THE SL-500FXLTM

install safely to top of rack

The RL-500™ Platform Riser enables you to reach to the top of any rack without hitting overhead obstructions.
Learn more »

installing server into drop-in rails

The RS-500X™ J-Frame Rail Assist helps you quickly and accurately lower equipment into slotted rails.
Learn more »

extended-warranty-graphic-2

ServerLIFT® Extended Service Contracts are available in one-, three- and five-year terms on the SL-500FXLTM. Warranty extensions include a year-end or end-of-term on-site preventative maintenance service.
Learn more »

GT-1000X Glide Table friction free unloading of servers

The GT-1000X™ Bi-Directional Glide Table helps you load and unload heavy servers with a single hand for a no-stress server move...every time.
Learn more »

FE-3X Extended Shelf adds support into the rack

Get extended reach and deep rack server support with the FE-3X™ Extended Shelf. Designed for use with the SL-500FXL™ Front-Loading Lift
Learn more »

FE-3X Extended Shelf adds support into the rack

The FE-3Xe™ Front-loading Extended Shelf adds 9.5" to the extended SL-500FX™ platform, with a narrow end of the plate. It extends 21" into the rack.
Learn more »

Get A Quote

Forms and FAQs

ServerLift®FAQS
sl-500fxLTM Specifications
sl-500fxLTM support documents

Why Our Customers Rely On ServerLIFT®

I would recommend it 100%. It literally has saved my team’s backs. This last year was our biggest year, and for us to do as much as we did (we did almost 200 racks in 6 months)...you can’t do that kind of work without having something that makes your job easier. ServerLIFT® solutions have taken all of that burden off of my team.
April Turner,Groupware Tech
The ServerLIFT® unit was of great benefit during the racking of our blade centers. With the use of the strap kit, one person was able to unbox and safely place the 300-pound device into a rack on the rails. The benefit of not having to remove the blades and power supply components from the chassis to make it lighter saved time and potential damage.
Ken Ward,Sr. Datacenter Engineer
Without a ServerLIFT® data center lift here, customers, they would be...let’s just say, very displeased if we didn’t offer that sort of a service when they got there and they went to rack their gear and they needed something to help them. It’s something that they rely on.
Bill Cory,Flexential
We really rely on our ServerLIFT® device. It was one of the best investments we made for our data centers. Thank you!
Scott Siewert,
Scott Siewert,Sr. Engineer, Metropolitan Airports Commission
We have a ServerLIFT® solution and it’s awesome. It can lift 500 lbs without issue. Even the largest Cisco devices can be installed using it. Our facilities group uses it to pull motors from CRAC Units. It’s well worth the investment.
Dan Balitewicz,Sr. Manager – Infrastructure Operations
In 15 minutes, we racked an HP chassis and 15 new hard drive enclosures, with only one engineer. Using our new lift is much safer and quicker than using 3 engineers.
Francisco Odiz, Triara
ServerLIFT® makes a great product that is easy to use, and promotes safety within the data center. It is especially useful to us in our new data centers, where we have standardized on 9ft. racks. I was most pleased with how easily it allowed us to move and re-rack our large AS/400 systems during a limited outage window.
Brad Gibbs,Lead Data Center Support
I was initially using a manual lift to move servers and other equipment. When the ServerLIFT® electric model came out it was an even better solution. If I have a server that needs to be installed and I am the only one available, I can get it down quickly and easily with the ServerLIFT® unit.
Dave Reno,IT Manager
Safety is our #1 priority. Originally, we didn’t have the resources to install the hardware safely. We were using other brands of both battery- operated and hand-crank lifts, but they required too much maintenance. Now, our ServerLIFT® unit is well-used and everybody is happy with the 'Cadillac' we bought. It’s a great investment.
Rory Bennett,
Rory Bennett,Senior Data Center Manager, AT&T Mobility
[grw id="24503"]
Speak to a specialist to find the right lifting solution for your data center.
call: (844) 802-6532

Download our FREE white paper, "The Data Center Safety Guidebook"

Do you struggle to create appropriate, realistic safety guidelines for your data center or colocation facility? This free guidebook outlines the operational standards required to achieve a 100% safe work environment.

Download It Now
Data-Center-Safety-Guidebook-Cover

ServerLIFT LLC

17453 N 25th Ave
Phoenix, AZ 85023

(844) 802-6532

Business Hours
8 AM – 5PM MST

Data Center Lifts

Attachments

Resources

Contact Us

Customer support portal

Youtube Linkedin-in Facebook-f
get a quote
GET SUPPORT
CALL: (844) 802-6532

SIMPLE, FAST SHIPPING AND WORLDwIDE DELIVERY.

Chat with us

© 2025 ServerLIFT LLC, All Rights Reserved.

Privacy Policy

enter the information below to download the whitepaper

The Data Center Safety Guidebook

enter the information below to download the whitepaper

The Data Center Migration Guide

enter the information below to download the whitepaper

Best Practices for Moving IT Department in the Data Center

enter the information below to download the whitepaper

Best Practices for Data Center Equipment Handling

enter the information below to download the whitepaper

data center consolidation action plan white paper

enter the information below to download the whitepaper

Buying a Data Center Lifting Device