ServerLIFT® Data Center Lift Attachments & Accessories

Data Center Lift Attachments

Fact: Most of our attachments were designed based on customer feedback. We listen, and we respond. Each attachment is shown below with a description of its function.

ATTACHMENTS & ACCESSORIES LE-500X™ PL-500X™ GT-1000X™ GS-1000™ RS-500X™ RL-500 ™ GR-500FX™ WS-1X™ WS-2X™ WS-3X™ FE-2X™ FE-3X ™

What do you need?

Help getting equipment out of the box

Less friction when moving servers into rack

To go deeper into the rack

A wider platform for a chassis

Help angling a server into the rails

The platform to be higher

To hit a ZERO U space

Assistance with large equipment w/o a lift

Have a different need? Contact us!

Série LE Extensions de levage

Déballez facilement les serveurs des boîtes

The ServerLIFT LE-500X™ and LE-1000X™ Lift Extensions are used to safely lift and remove servers, switches, UPS devices, and other rack-mounted equipment out of boxes and off of pallets without destroying the packaging or straining your back. These critical tools free operators from ever having to manually unpack boxes or lift equipment ever again.

PL-500X Extension

Équipement informatique descendant au sol

Le PL-500X Extension brings the reach of any ServerLIFT® machine down to the floor, so that it can safely and precisely handle equipment at bottom rack positions for near-ground installs. Extend your reach beyond and below the ServerLIFT® machine frame, enabling you to perform assisted moves in even the most challenging of spaces.

GT-1000X Glide Platform

Déplacement sans effort et sans friction du serveur

The GT-1000X™ Glide Platform helps you load and unload heavy servers with ease. The integrated rollers reduce friction for effortless gliding, and can also be locked out with the built-in brake for safely securing the server in place during transport. Slide servers and switches on or off the ServerLIFT® platform for a no-stress server move…. every time.

RS-500X J-Frame Rail Assist

Angle dans ou hors des rails à fente

The RS-500X™ J-Frame Rail Assist supports server equipment while giving the operator control over the angle of the server at all points of installation or removal from the rails. Capable of attaching to any ServerLIFT® platform, the RS-500X can be used to easily tilt servers into slotted guard rails or keep them level for non-slotted, bolt-in installs.

RL-500 Plateforme élévatrice

Atteignez le sommet de n'importe quel rack en toute sécurité

The RL-500™ Platform Riser ensures that server installs are seamless and safe for all data center specifications, including environments with overhead obstructions. Along with optimum server support for top-of-the-rack installs, the RL-500™ Platform Riser raises the working height of the platform itself, expanding the capability of any ServerLIFT® machine to over 58U high.

WS-1X Tablette large de 17 po

Conçu pour prendre en charge des serveurs étendus

The WS-1X™ Wide Shelf is a 17″ (43.2 cm) wide plate attachment that provides additional shelf surface area to fully support servers across their entire width. Designed for uncrating and installing the NVIDIA DGX-2 and the NVIDIA DGX A100, it supports up to 500 lbs (227 kg) at the center and 300 lbs (136 kg) at the extended side edge. The WS-1X™ is compatible with all side-loading ServerLIFT® models.

Logo NVIDIA

Conçu pour être utilisé avec les serveurs NVIDIA DGX-2 et NVIDIA DGX A100

WS-2XTM WIDE SHELF (Bigger)

The WS-2X™ Wide Shelf is a 21″-wide (53.3 cm) plate attachment that can provide even more shelf surface area to fully support servers with side-structural frames across their entire width. It supports up to 500 lbs (227 kg) at the center and 300 lbs (136 kg) at the extended side edge. The WS-2X™ is compatible with all side-loading ServerLIFT® models.

WS-3XTM WIDE SHELF (Biggest)

The WS-3X™ Wide Shelf is a 30″-wide (76.2 cm) plate attachment with the most shelf surface area available to fully support servers with side-structural frames across their entire width. It supports up to 500 lbs (227 kg) at the center and 300 lbs (136 kg) at the extended side edge. The WS-3X™ is compatible with all side-loading ServerLIFT® models.

FE-3X Tablette allongée

Prise en charge du serveur Extended Reach et Deep Rack

Bénéficiez d'une portée étendue et d'une prise en charge de serveur en rack profonde avec l'étagère étendue FE-3X ™. Conçu pour être utilisé avec le Élévateur à chargement frontal SL-500FX ™, ce combo fournit un support rigide pour les serveurs profondément dans n'importe quel rack. Parfait pour les fabricants et les intégrateurs de systèmes.

Data Center Lift Accessories

Enhance your data center lift experience with practical accessories. We have more accessories coming, so keep an eye out for them.

BCS: Battery Charging Station

Bring the cart to the lift. Remove the dead battery and place it on the cart. Move the cart to an outlet. Recharge the battery, and use the cart to take the fully charged battery back to the lift for installation.

GS-1000 Glide Shelf

GS 1000R Glide Shelf Round Pin Option or GS-1000S Glide Shelf Square Pin Option

These shelves attach to a server rack so you can smoothly slide equipment in or out of the rack.

LTK: Lift Tool Kit

All the tools you need to perform basic maintenance and repair of a ServerLIFT data center lift.

entrez les informations ci-dessous pour télécharger le livre blanc

Guide de migration du centre de données

entrez les informations ci-dessous pour télécharger le livre blanc

Guide de sécurité du centre de données

entrez les informations ci-dessous pour télécharger le livre blanc

Meilleures pratiques pour déplacer le service informatique dans le centre de données

entrez les informations ci-dessous pour télécharger le livre blanc

Meilleures pratiques pour la gestion de l'équipement du centre de données

entrez les informations ci-dessous pour télécharger le livre blanc

plan d'action de consolidation du centre de données livre blanc

entrez les informations ci-dessous pour télécharger le livre blanc

Achat d'un appareil de levage pour centre de données