ServerLIFT logo
Meny
Få et tilbud

ServerLIFT SL-350X® Hand-Cranked Data Center Lift

Vår Premium Hand-Cranked Datasenterheis

Gullstandardalternativet til motoriserte heiser, ServerLIFT SL-350X® Hand-Cranked Data Center Lift is the recommended choice for occasional server moves of equipment up to 350 lbs (159 kg). Each feature is designed to reduce joint stress and enable accurate alignment of data center equipment—and with no charging required. With the ServerLIFT SL-350X® Hand-Cranked Data Center Lift, one tech can safely and single-handedly load, transport, position, and install equipment weighing up to 350 lbs (159 kg).

  • UL-Listed

1.  We are the gold/industry standard.

2.  We are the ONLY UL/CE/FCC/IC-certified family.

3.  We have the safest data center lifts in the industry.

Compatible Attachments and Accessories

LE-500X™

PL-500X™

GT-1000X™

RS-500X™

RL-500 ™

VMH-500X™

WS-1X™

WS-2X™

WS-3X™

GS-1000XR™

SE I HANDLING
Spec Sheet
Operator's Manual
ServerLIFT SL-350X® Data Center Lift Dimensions
vedlegg

DATA SENTRUM APPLIKASJONER

Kraftig håndveivikon 1

Tilfeldig server flytter

Elektrisk heisalternativ

Elektrisk heisalternativ

350 kg vekt

Lettere maskinvare

Den ledende datasenterheisen for sjeldne bevegelser av maskinvare

Moving IT hardware by hand—even lightweight 2U and 4U servers—quickly becomes a physical and logistical pain for all data center operations. The ServerLIFT SL-350X® Hand-Cranked Data Center Lift was built with this in mind, offering an intuitive and easy-to-use solution for lighter IT hardware in any data center environment. Server support goes up to 52U high (8 ft or 2.44 m) to allow for easy and safe transport from the dock to the rack, and back again.  It can also traverse ramps and floor gradients (max. angle of 6 degrees.)

Fotspor (BxLxH): 24 x 44 x 69 tommer
Vekt (losset): 360 kg (163 kg)

Fraktdimm (BxLxH): 26 x 45 x 78 tommer
Fraktvekt: 462 lb (210 kg)

Det smarte, rimelige valget

The ServerLIFT SL-350X® Hand-Cranked Data Center Lift features a durable and ergonomic design in a light-duty unit. The powerful hand crank offers mechanically-advantaged lifting of IT equipment weighing up to 350 lbs (159 kg), meaning a tech no longer has to team up for risky manual lifts. Use the ServerLIFT SL-350X® Hand-Cranked Data Center Lift within aisles as narrow as 36″ wide (91 cm). Tilt and angle the server or other equipment by up to 2 degrees using the stable, micro-leveling platform.

Få et tilbud

Sikkerhet er vår topp prioritet

ServerLIFT® server handling lifts are designed to be the data center professional’s safest and smartest decision. Ours is the only data center lift certified to meet US and global safety standards.

CE icon
FC logo
IC Logo
Man grabbing his back in pain

Danger in the Data Center​

"Manuell materialhåndtering er den viktigste kilden til erstatningsskader i den amerikanske arbeidsstyrken, og fire av fem av disse skadene vil påvirke korsryggen."
- Arbeidsmiljøetaten

"Over 36% av skader som involverte tapte arbeidsdager var et resultat av skulder- og ryggskader ... ved å løfte belastninger over 50 kg øker du risikoen for skader."
- US Bureau of Labor

Ingen flere manuelle løft

Produsenter av IT-utstyr spesifiserer vanligvis to til fire personer for håndtering og installasjon. Selv med fire personer øker unødvendig løfteutstyr unødvendig risikoen for ulykke. Manuell løfting forsinker også andre viktige datasentreoppgaver fra å bli utført.

dårlig løfteteknikk
SL350X_ServerInstall_Parker-04

Spar tid og penger med ServerLIFT®

Installing servers and related IT equipment by hand is both dangerous and inefficient. Depending on the number of people used to install equipment, data center efficiency can improve by up to 300% when using ServerLIFT® devices instead.

Two salaried employees installing a new piece of rack-mounted equipment weighing 75 pounds*, by hand, provides a perfect example. This task requires 30+ minutes of high-tension work per employee, risking muscle strain, pinched fingers, and other injuries. Conversely, a single tech using a ServerLIFT® data center lift can make the move in 15 minutes with no risk involved.

* montert på stativet - ingen kabling eller tilkoblinger
Få et tilbud
30 Day Money Back Guarantee

ServerLIFT® Guarantee

The ServerLIFT SL-350X® Hand-Cranked Data Center Lift is backed by a worry-free, 30-day Money-Back Guarantee.

30 Day Money Back Guarantee

ServerLIFT SL-350X® Hand-Cranked Data Center Lift FEATURES

Kompakt design

The open design of the ServerLIFT SL-350X® Hand-Cranked Data Center Lift maintains a minimal footprint while allowing for total accessibility. The lift’s slim 24-inch base navigates narrow aisles and fits through standard-size doorways and elevator doors without tipping. With a tight turning radius and retracting side shelf, operators can move freely around the data center lift and work on either side without having to squeeze through or risk getting hurt.

Robust, Mico-Leveling-plattform

The platform of the ServerLIFT SL-350X® Hand-Cranked Data Center Lift stays rigid and stable, even when lifting up to 350 lbs. (159 kg). This, along with the user-controlled micro-leveling SmartTILT™ shelf adjustment feature, provides the critical post-to-post alignment needed to precisely rack-mount any server, making installation a breeze.

Dreiehåndtak kan enkelt dreies
Som rapportert av en av våre kunder: "I løpet av 15 minutter racket vi et HP-chassis og 15 nye harddiskkapsler, med bare en ingeniør. Å bruke vår nye heis er mye tryggere og raskere enn å bruke tre ingeniører."
Som rapportert av en av våre kunder: "I løpet av 15 minutter racket vi et HP-chassis og 15 nye harddiskkapsler, med bare en ingeniør. Å bruke vår nye heis er mye tryggere og raskere enn å bruke tre ingeniører."
Stabilisatorbrems med dobbelt punkt
The proprietary ServerLIFT® brake system prevents any movement when transferring equipment on or off the platform, holding the entire machine rigid and stable.
The proprietary ServerLIFT<sup>®</sup> brake system prevents any movement when transferring equipment on or off the platform, holding the entire machine rigid and stable.
Store svingbare hjul
De store casterhjulene foran og bak ruller lett over noen hindringer og vil ikke markere datasentergulv. De fremre hjulene kan låses for enkel transport nedover rette ganger og gangar.
De store casterhjulene foran og bak ruller lett over noen hindringer og vil ikke markere datasentergulv. De fremre hjulene kan låses for enkel transport nedover rette ganger og gangar.
Kompakt design
The lift’s slim 24-inch (61 cm) base and oversized wheels smoothly navigate aisles, corners, and ramps while providing ample space for an operator — even in the narrowest of data center aisles. ServerLIFT®’s unique mast design keeps the retracted lift height low enough to fit through standard-size doorways and elevators.
The lift’s slim 24-inch (61 cm) base and oversized wheels smoothly navigate aisles, corners, and ramps while providing ample space for an operator — even in the narrowest of data center aisles. ServerLIFT<sup>®</sup>’s unique mast design keeps the retracted lift height low enough to fit through standard-size doorways and elevators.
Teleskopmast
When fully extended, the mast lifts the platform equipment surface up to 8 ft (2.44 m) high to reach the highest racks (52U, or over 58U when used with the RL-500™ Platform Riser attachment). As an added safety feature in height-restricted environments, the TouchSTOPⓇ overhead sensor prevents both structural and equipment damage by stopping the lift motor on contact with the ceiling or other overhead obstructions.
When fully extended, the mast lifts the platform equipment surface up to 8 ft (2.44 m) high to reach the highest racks (52U, or over 58U when used with the RL-500™ Platform Riser attachment). As an added safety feature in height-restricted environments, the TouchSTOPⓇ overhead sensor prevents both structural and equipment damage by stopping the lift motor on contact with the ceiling or other overhead obstructions.
Fullt løftet
SL-500FX Front-Loading Powered Lift er i stand til å betjene mer enn en hel dag på en enkelt lading, og har en ikke-hydraulisk, kraftig vinsjmotor og et lekkasjesikkert AGM-batteri (Absorbed Glass Mat) som er trygge for bruk i ethvert datasentermiljø. Enheten er utstyrt med valget av et 110V eller 220V 3-trinns ladesystem.
SL-500FX Front-Loading Powered Lift er i stand til å betjene mer enn en hel dag på en enkelt lading, og har en ikke-hydraulisk, kraftig vinsjmotor og et lekkasjesikkert AGM-batteri (Absorbed Glass Mat) som er trygge for bruk i ethvert datasentermiljø. Enheten er utstyrt med valget av et 110V eller 220V 3-trinns ladesystem.
Få et tilbud

FUNKSJONELLE OPPBEVARINGER FOR SL-350X®

GT-1000X Glide Table friksjonsfri lossing av servere

GT-1000X ™ Bi-Directional Glide Table hjelper deg med å laste og losse tunge servere med en enkelt hånd for en bevegelighet uten stress ... hver gang.
Learn more »

installere server i drop-in skinner

The RS-500X™ J-Rail Assist helps you quickly and accurately lower equipment into slotted rails.
Learn more »

extended-warranty-graphic-2

ServerLIFT® Extended Service Contracts are available in three- and five-year terms on the ServerLIFT SL-350X® Hand-Cranked Data Center Lift. Warranty extensions include a year-end or end-of-term on-site preventative maintenance service.
Learn more »

monter sikkert på toppen av stativet

Med RL-500 ™ Platform Riser kan du nå toppen av ethvert stativ uten å treffe hemmelige hindringer.
Learn more »

tilbehør til utvidelse av serverheiseplattform

PL-500X® Platform Extension brings the reach of any ServerLIFT® machine down to the floor.
Lære mer "

bg-sikkerhetsfokus

LE-500X ™ Lift Extension hjelper med å løfte tungt IT-utstyr av paller og ut av esker.
Lære mer "

Få et tilbud

Skjemaer og vanlige spørsmål

ServerLift®Vanlige spørsmål
sl-350x® spesifikasjoner
sl-350x® support documents

Why Our Customers Rely on ServerLIFT®

På 15 minutter racket vi et HP-chassis og 15 nye harddiskkapsler, med bare en ingeniør. Det er mye tryggere og raskere å bruke vår nye heis enn å bruke 3 ingeniører.
Francisco Odiz, Triara
Without a ServerLIFT® data center lift here, customers, they would be...let’s just say, very displeased if we didn’t offer that sort of a service when they got there and they went to rack their gear and they needed something to help them. It’s something that they rely on.
Bill Cory,Flexential
Safety is our #1 priority. Originally, we didn’t have the resources to install the hardware safely. We were using other brands of both battery- operated and hand-crank lifts, but they required too much maintenance. Now, our ServerLIFT® unit is well-used and everybody is happy with the 'Cadillac' we bought. It’s a great investment.
Rory Bennett,Senior datasenterleder, AT&T Mobility
I would recommend it 100%. It literally has saved my team’s backs. This last year was our biggest year, and for us to do as much as we did (we did almost 200 racks in 6 months)...you can’t do that kind of work without having something that makes your job easier. ServerLIFT® solutions have taken all of that burden off of my team.
April Turner,Groupware Tech
ServerLIFT® unit was of great benefit during the racking of our blade centers. With the use of the strap kit, one person was able to unbox and safely place the 300-pound device into a rack on the rails. The benefit of not having to remove the blades and power supply components from the chassis to make it lighter saved time and potential damage.
Ken Ward,Sr Datacenter Engineer
We have a ServerLIFT® solution and it’s awesome. It can lift 500 lbs without issue. Even the largest Cisco devices can be installed using it. Our facilities group uses it to pull motors from CRAC Units. It’s well worth the investment.
Dan Balitewicz,Sr.leder - infrastrukturdrift
ServerLIFT® makes a great product that is easy to use, and promotes safety within the data center. It is especially useful to us in our new data centers, where we have standardized on 9ft. racks. I was most pleased with how easily it allowed us to move and re-rack our large AS/400 systems during a limited outage window.
Brad Gibbs,Lead Data Center Support
I was initially using a manual lift to move servers and other equipment. When the ServerLIFT® electric model came out it was an even better solution. If I have a server that needs to be installed and I am the only one available, I can get it down quickly and easily with the ServerLIFT® unit.
Dave Reno,IT-sjef
[grw id="24503"]
Snakk med en spesialist for å finne den rette løfteløsningen for ditt datasenter.
call: 844-209-2674

Last ned vår GRATIS hvitbok, "Beste fremgangsmåter for å flytte IT-utstyr i datasenteret"

Enten operatører utfører standardfunksjoner eller flytter IT-utstyr mellom anleggene, tilbyr vår gratis guidebok en verdifull sjekkliste for å utføre en bevegelse trygt og uten unødvendig risiko.

Download It Now
Best-Practices-for-Moving-IT-Equipment-Guidebook-Cover-Mockup

legg inn informasjonen nedenfor for å laste ned whitepaper

legg inn informasjonen nedenfor for å laste ned whitepaper

legg inn informasjonen nedenfor for å laste ned whitepaper

legg inn informasjonen nedenfor for å laste ned whitepaper

legg inn informasjonen nedenfor for å laste ned whitepaper

legg inn informasjonen nedenfor for å laste ned whitepaper