ServerLIFT logo
Menu
Get a Quote

ServerLIFT SL-350X® Hand-Cranked Data Center Lift

Lift Pusat Data Engkol Tangan Premium kami

Alternatif standar emas untuk lift bermotor, ServerLIFT SL-350X® Hand-Cranked Data Center Lift is the recommended choice for occasional server moves of equipment up to 350 lbs (159 kg). Each feature is designed to reduce joint stress and enable accurate alignment of data center equipment—and with no charging required. With the ServerLIFT SL-350X® Hand-Cranked Data Center Lift, one tech can safely and single-handedly load, transport, position, and install equipment weighing up to 350 lbs (159 kg).

  • UL-Listed

1.  We are the gold/industry standard.

2.  We are the ONLY UL/CE/FCC/IC-certified family.

3.  We have the safest data center lifts in the industry.

Compatible Attachments and Accessories

LE-500X™ Lift Extension: Effortlessly unpack cargo from pallets and boxes.

PL-500X™ Platform Extension: Perform floor-level installations with zero back strain.

GT-1000X™ Glide Platform: Smoothly roll IT equipment in and out of rack slots.

RS-500X™ J-Rail Assist: Perfectly align loads to fit J-Rails and other slotted guard rails.

RL-500 ™ Platform Riser: Add 15.75 inches to your reach for top-rack installs that go smoothly.

VMH-500X™ Vertical Module Handler: Maintain stability while moving vertical chassis servers.

GR-500X™ Multi-Axis Roller Table: Achieve precise positioning with omnidirectional ball bearings.

Rak Lebar WS-1X ™

WS-2X™ Wide Shelf: Expand your lifting shelf to 21” for even bigger IT systems.

WS-3X™ Wide Shelf: Achieve maximum support with a massive 30” shelf.

GS-1000XR™ Glide Shelf Round Pin Option: Attach rollers to server racks for seamless installations and removals.

MELIHAT AKSI
Spec Sheet
Operator's Manual
ServerLIFT SL-350X® Data Center Lift Dimensions
Lampiran

APLIKASI PUSAT DATA

Ikon engkol tangan yang kuat 1

Server Bergerak Sesekali

Alternatif Pengangkatan Listrik

Alternatif Pengangkatan Listrik

Berat 350 lb

Perangkat Keras IT Lighter

Lift Pusat Data Terkemuka untuk Pergerakan Perangkat Keras TI yang Jarang

Moving IT hardware by hand—even lightweight 2U and 4U servers—quickly becomes a physical and logistical pain for all data center operations. The ServerLIFT SL-350X® Hand-Cranked Data Center Lift was built with this in mind, offering an intuitive and easy-to-use solution for lighter IT hardware in any data center environment. Server support goes up to 52U high (8 ft or 2.44 m) to allow for easy and safe transport from the dock to the rack, and back again.  It can also traverse ramps and floor gradients (max. angle of 6 degrees.)

Tapak (WxLxH): 24 x 44 x 69 inci
Bobot (dibongkar): 360lb (163 kg)

Dims pengiriman (WxLxH): 26 x 45 x 78 inci
berat pengiriman: 462lb (210 kg)

Pilihan Cerdas, Terjangkau

The ServerLIFT SL-350X® Hand-Cranked Data Center Lift features a durable and ergonomic design in a light-duty unit. The powerful hand crank offers mechanically-advantaged lifting of IT equipment weighing up to 350 lbs (159 kg), meaning a tech no longer has to team up for risky manual lifts. Use the ServerLIFT SL-350X® Hand-Cranked Data Center Lift within aisles as narrow as 36″ wide (91 cm). Tilt and angle the server or other equipment by up to 2 degrees using the stable, micro-leveling platform.

Dapatkan Penawaran

Keselamatan Adalah Prioritas Utama Kami

ServerLIFT® server handling lifts are designed to be the data center professional’s safest and smartest decision. Ours is the only data center lift certified to meet US and global safety standards.

CE icon
FC logo
IC Logo
Man grabbing his back in pain

Danger in the Data Center​

"Penanganan material secara manual adalah sumber utama cedera yang dapat diganti rugi di angkatan kerja Amerika, dan empat dari lima cedera ini akan memengaruhi punggung bawah."
- Administrasi Keselamatan dan Kesehatan Kerja

"Lebih dari 36% cedera yang melibatkan hari kerja yang terlewatkan adalah akibat dari cedera bahu dan punggung ... mengangkat beban lebih dari 50 pound akan meningkatkan risiko cedera."
- Biro Tenaga Kerja AS

Tidak Ada Lagi Pengangkatan Manual

Pabrikan peralatan TI biasanya menetapkan penggunaan dua hingga empat orang untuk penanganan dan pemasangan. Bahkan dengan empat orang, mengangkat peralatan secara manual tidak perlu meningkatkan risiko kecelakaan. Pengangkatan secara manual juga menunda tugas pusat data penting lainnya dari yang dilakukan.

teknik mengangkat yang buruk
SL350X_ServerInstall_Parker-04

Hemat Waktu dan Uang dengan ServerLIFT®

Installing servers and related IT equipment by hand is both dangerous and inefficient. Depending on the number of people used to install equipment, data center efficiency can improve by up to 300% when using ServerLIFT® devices instead.

Two salaried employees installing a new piece of rack-mounted equipment weighing 75 pounds*, by hand, provides a perfect example. This task requires 30+ minutes of high-tension work per employee, risking muscle strain, pinched fingers, and other injuries. Conversely, a single tech using a ServerLIFT® data center lift can make the move in 15 minutes with no risk involved.

* dipasang ke rak — tidak ada kabel atau koneksi
Dapatkan Penawaran
30 Day Money Back Guarantee

ServerLIFT® Guarantee

The ServerLIFT SL-350X® Hand-Cranked Data Center Lift is backed by a worry-free, 30-day Money-Back Guarantee.

30 Day Money Back Guarantee

ServerLIFT SL-350X® Hand-Cranked Data Center Lift FEATURES

Desain yang Kompak

The open design of the ServerLIFT SL-350X® Hand-Cranked Data Center Lift maintains a minimal footprint while allowing for total accessibility. The lift’s slim 24-inch base navigates narrow aisles and fits through standard-size doorways and elevator doors without tipping. With a tight turning radius and retracting side shelf, operators can move freely around the data center lift and work on either side without having to squeeze through or risk getting hurt.

Platform Mico-Leveling yang Kokoh

The platform of the ServerLIFT SL-350X® Hand-Cranked Data Center Lift stays rigid and stable, even when lifting up to 350 lbs. (159 kg). This, along with the user-controlled micro-leveling SmartTILT™ shelf adjustment feature, provides the critical post-to-post alignment needed to precisely rack-mount any server, making installation a breeze.

Pegangan Putar Putar Dengan Mudah
Seperti dilaporkan oleh salah satu pelanggan kami: "Dalam 15 menit, kami memutar sasis HP dan 15 penutup hard drive baru, dengan hanya satu insinyur. Menggunakan lift baru kami jauh lebih aman dan lebih cepat daripada menggunakan 3 insinyur."
Seperti dilaporkan oleh salah satu pelanggan kami: "Dalam 15 menit, kami memutar sasis HP dan 15 penutup hard drive baru, dengan hanya satu insinyur. Menggunakan lift baru kami jauh lebih aman dan lebih cepat daripada menggunakan 3 insinyur."
Rem Stabilizer Titik Ganda
The proprietary ServerLIFT® brake system prevents any movement when transferring equipment on or off the platform, holding the entire machine rigid and stable.
The proprietary ServerLIFT<sup>®</sup> brake system prevents any movement when transferring equipment on or off the platform, holding the entire machine rigid and stable.
Kastor Putar Besar
Roda kastor depan dan belakang yang besar terguling dengan mudah pada halangan apa pun dan tidak akan menandai lantai pusat data. Kastor depan dapat dikunci agar mudah diangkut melalui lorong dan lorong lurus.
Roda kastor depan dan belakang yang besar terguling dengan mudah pada halangan apa pun dan tidak akan menandai lantai pusat data. Kastor depan dapat dikunci agar mudah diangkut melalui lorong dan lorong lurus.
Desain yang Kompak
The lift’s slim 24-inch (61 cm) base and oversized wheels smoothly navigate aisles, corners, and ramps while providing ample space for an operator — even in the narrowest of data center aisles. ServerLIFT®’s unique mast design keeps the retracted lift height low enough to fit through standard-size doorways and elevators.
The lift’s slim 24-inch (61 cm) base and oversized wheels smoothly navigate aisles, corners, and ramps while providing ample space for an operator — even in the narrowest of data center aisles. ServerLIFT<sup>®</sup>’s unique mast design keeps the retracted lift height low enough to fit through standard-size doorways and elevators.
Tiang Telescoping
When fully extended, the mast lifts the platform equipment surface up to 8 ft (2.44 m) high to reach the highest racks (52U, or over 58U when used with the RL-500™ Platform Riser attachment). As an added safety feature in height-restricted environments, the TouchSTOPⓇ overhead sensor prevents both structural and equipment damage by stopping the lift motor on contact with the ceiling or other overhead obstructions.
When fully extended, the mast lifts the platform equipment surface up to 8 ft (2.44 m) high to reach the highest racks (52U, or over 58U when used with the RL-500™ Platform Riser attachment). As an added safety feature in height-restricted environments, the TouchSTOPⓇ overhead sensor prevents both structural and equipment damage by stopping the lift motor on contact with the ceiling or other overhead obstructions.
Mengangkat Sepenuhnya Bertenaga
Mampu beroperasi lebih dari sehari penuh dengan sekali pengisian daya, Lift Bertenaga Depan-Memuat SL-500FX menghadirkan motor winch non-hidrolik dan tugas berat dan baterai AGM (Absorbed Glass Mat) anti bocor yang aman untuk digunakan di lingkungan pusat data apa pun. Unit ini dilengkapi dengan pilihan sistem pengisian 3 tahap 110V atau 220V.
Mampu beroperasi lebih dari sehari penuh dengan sekali pengisian daya, Lift Bertenaga Depan-Memuat SL-500FX menghadirkan motor winch non-hidrolik dan tugas berat dan baterai AGM (Absorbed Glass Mat) anti bocor yang aman untuk digunakan di lingkungan pusat data apa pun. Unit ini dilengkapi dengan pilihan sistem pengisian 3 tahap 110V atau 220V.
Dapatkan Penawaran

LAMPIRAN FUNGSIONAL UNTUK SL-350X®

GT-1000X Glide Table bebas dari pembongkaran server

GT-1000X ™ Bi-Directional Glide Table membantu Anda memuat dan membongkar server berat dengan satu tangan untuk pemindahan server tanpa tekanan ... setiap saat.
Learn more »

menginstal server ke rel drop-in

The RS-500X™ J-Rail Assist helps you quickly and accurately lower equipment into slotted rails.
Learn more »

extended-warranty-graphic-2

ServerLIFT® Extended Service Contracts are available in three- and five-year terms on the ServerLIFT SL-350X® Hand-Cranked Data Center Lift. Warranty extensions include a year-end or end-of-term on-site preventative maintenance service.
Learn more »

instal dengan aman ke atas rak

RL-500 ™ Platform Riser memungkinkan Anda menjangkau bagian atas rak tanpa memukul penghalang di atas kepala.
Learn more »

aksesori ekstensi platform angkat server

PL-500X® Platform Extension brings the reach of any ServerLIFT® machine down to the floor.
Belajarlah lagi "

bg-fokus-keselamatan

LE-500X ™ Lift Extension membantu mengangkat peralatan IT berat dari palet dan kotak.
Belajarlah lagi "

Dapatkan Penawaran

Formulir dan FAQ

ServerLift®FAQS
sl-350x® Spesifikasi
sl-350x® support documents

Why Our Customers Rely on ServerLIFT®

Dalam 15 menit, kami memasang sasis HP dan 15 penutup hard drive baru, dengan hanya satu insinyur. Menggunakan lift baru kami jauh lebih aman dan lebih cepat daripada menggunakan 3 insinyur.
Francisco Odiz, Triara
Without a ServerLIFT® data center lift here, customers, they would be...let’s just say, very displeased if we didn’t offer that sort of a service when they got there and they went to rack their gear and they needed something to help them. It’s something that they rely on.
Bill Cory,Fleksibilitas
Safety is our #1 priority. Originally, we didn’t have the resources to install the hardware safely. We were using other brands of both battery- operated and hand-crank lifts, but they required too much maintenance. Now, our ServerLIFT® unit is well-used and everybody is happy with the 'Cadillac' we bought. It’s a great investment.
Rory Bennett,Manajer Pusat Data Senior, Mobilitas AT&T
I would recommend it 100%. It literally has saved my team’s backs. This last year was our biggest year, and for us to do as much as we did (we did almost 200 racks in 6 months)...you can’t do that kind of work without having something that makes your job easier. ServerLIFT® solutions have taken all of that burden off of my team.
April Turner,Groupware Tech
ServerLIFT® unit was of great benefit during the racking of our blade centers. With the use of the strap kit, one person was able to unbox and safely place the 300-pound device into a rack on the rails. The benefit of not having to remove the blades and power supply components from the chassis to make it lighter saved time and potential damage.
Ken Ward,Insinyur Datacenter Sr.
We have a ServerLIFT® solution and it’s awesome. It can lift 500 lbs without issue. Even the largest Cisco devices can be installed using it. Our facilities group uses it to pull motors from CRAC Units. It’s well worth the investment.
Dan Balitewicz,Sr. Manager - Operasi Infrastruktur
ServerLIFT® makes a great product that is easy to use, and promotes safety within the data center. It is especially useful to us in our new data centers, where we have standardized on 9ft. racks. I was most pleased with how easily it allowed us to move and re-rack our large AS/400 systems during a limited outage window.
Brad Gibbs,Dukungan Pusat Data Timbal
I was initially using a manual lift to move servers and other equipment. When the ServerLIFT® electric model came out it was an even better solution. If I have a server that needs to be installed and I am the only one available, I can get it down quickly and easily with the ServerLIFT® unit.
Dave Reno,Manajer IT
[grw id="24503"]
Bicaralah dengan spesialis untuk menemukan solusi pengangkatan yang tepat untuk pusat data Anda.
call: 844-209-2674

Unduh kertas putih GRATIS kami, "Praktik Terbaik untuk Memindahkan Peralatan TI di Pusat Data"

Apakah operator melakukan fungsi standar atau memigrasikan peralatan TI di antara fasilitas, buku panduan gratis kami menawarkan daftar periksa berharga untuk melakukan perpindahan dengan aman dan tanpa risiko yang tidak perlu.

Download It Now
Best-Practices-for-Moving-IT-Equipment-Guidebook-Cover-Mockup

masukkan informasi di bawah ini untuk mengunduh whitepaper

masukkan informasi di bawah ini untuk mengunduh whitepaper

masukkan informasi di bawah ini untuk mengunduh whitepaper

masukkan informasi di bawah ini untuk mengunduh whitepaper

masukkan informasi di bawah ini untuk mengunduh whitepaper

masukkan informasi di bawah ini untuk mengunduh whitepaper