Sök
Stäng denna sökruta.

Varför oss

De tre reglerna
av en datacenterlyft

Varje serverhanteringsverktyg som beaktas för användning i ett datacenter måste på den mest grundläggande nivån kunna säkert och effektivt utföra de nödvändiga funktionerna som behövs från en datacentrallift.

1
  TRANSPORT

Serverhanteringsutrustning ska kunna transportera servrar och annan IT-utrustning runt vilken datacentrummiljö som helst. En datacenterlyft måste effektivt navigera: 

  • Genom standardstorlekar och hissar
  • Serverrumsgångar med luftkablar
  • Över vanliga golvhinder

Dörrar och hissar

ServerLIFT®’s tallest device, the SL-1000X® Super-Duty Lift, measures less than 6.5 feet (197 cm) tall, permitting it to move comfortably through any doorway or elevator. Using a ServerLIFT® device, your staff will not lose time or take risks transporting servers with push carts and then transferring them to the data center lift for an install.

gångar

ServerLIFT® purpose-built devices allow operators to safely access both sides of the aisle without having to turn the device around. They were designed for ultimate practicality as they install and remove equipment from racks, without the need to rotate the lift in the aisle. Even better, our lifts can be locked into place using controls both on the brakes and the handles for safe positioning.

Golvhinder

A ServerLIFT® machine has nearly a full inch of undercarriage clearance (0.9-inch [2.28 cm]) without compromising on how low it can install servers in a rack. It will not bottom out nor get stuck when traversing common obstacles or standard ADA ramps. It also has large wheels, making it easier to push with greater overall stability. Our data center lifts will not get stuck or tip over in any data center environment when used as instructed.

2
  PLACERA

En datacentrallift måste positionera och stödja servrar exakt och stadigt för att göra det enkelt för operatörerna att utföra sitt arbete.

SL-500FX-serverlyft teleskopmast

Höjd

ServerLIFT® devices reach up to a minimum of 8.16 feet (98 inches [248.9 cm]), or, with the RL-500 ™ Platform Riser, till 9,5 fot (289,5 cm). SL-1000X stöder servrar som är upp till 8,75 fot höga (266,7 cm) och är också kompatibla med RL-500 Platform Riser för utökad räckvidd vid behov. Dessutom genom att fästa en PL-500X™ Platform Extension to the ServerLIFT® device, equipment can reach the lowermost positions in a rack or cabinet and even all the way down to the floor.

Justering sida vid sida

All of ServerLIFT®’s devices have rigid platforms that will not sag, which can throw off side-to-side alignment and complicate the installation process. In addition, our lift platforms feature SmartTILT™ technology. An operator can adjust the platform angle in precise measure for proper alignment of the server with the rack posts. The shelf can be tilted up or down with a total range of 2 degrees for micro-leveling when an operator is working with heavy loads causing slight deflection.

Framåt järnvägsinstallationer

ServerLIFT® designed its data center lifts to adjust the forward angle of servers using the RS-500X ™ Rail Lift. This into-the-rack angling allows for easing equipment into slotted rails safely without manual effort. Your IT staff, equipped with ServerLIFT® solutions, will never have to struggle to line up the nail-heads of a server with the rail slots by hand ever again.

3
  INSTALL / DEMONTERING

Data center lifts must effectively and safely assist in the installation and removal of servers to/from a rack.

SL-500FX-serverinstallation

Utrustningssupport

ServerLIFT® platforms support servers into the server cabinet with ease. The ServerLIFT® SL-1000X®, SL-500X®, och SL-350 gångers förstoring® data center lifts feature a Sliding Shelf which extends 6 inches to each side for side-loading capability for a total of 12 inches of travel. The ServerLIFT® SL-500FX ™ frontlyft kan stödja utrustning upp till 20 ″ och placera den i vilket serverrack som helst. De FE-3X ™ Utökad hyllplan is a valuable attachment, nearly doubling the forward reach of the SL-500FX™ platform.

Operatörstillträde

ServerLIFT® winch-pulley-cable system lies outside of the platform lift area, and it is enclosed, protecting hands from potential pinch points. Its frame does not surround the platform, so it does not interfere with reaching the server from either side, back, or front.

Stabilitet

ServerLIFT® data center lifting devices can support any server within device capacity. They are designed for incredibly stable, yet freestanding installation and removal, and will not tip over while traversing uneven data center floors. Our dual-point stabilizer brakes are large and accessible for ease of use and lock down the lift, preventing any movement even when pulling a heavy server on or off the platform during a server move. ServerLIFT® equipment stays stable without the need for straps, although we do recommend straps to secure equipment to the lift for use during transport.

Jämförelse:
De 3 reglerna

av en datacenterassisterad lyftanordning

ServerLIFT® RackLift™ Lagerlyft

Utför alla funktioner

JA

NEJ

NEJ

1. Transport

Dörrar och hissar

Passar genom standardstorlek

Golvhinder

Avstånd för att navigera över ramper, kablar etc.

2. Position

Höjd

Når alla rackpositioner (upp till 58U)

*

Justering (sida till sida)

Håller servernivå och anpassas till rackposter

Justering (framifrån)

Vinklar eller lutar servern in / ut från slitsade räls

3. Installera / ta bort

Stabilitet

Övergripande enhet låses på plats utan att behöva stöd utanför. Skjutplattformen låses på plats så att utrustningen kan skjutas på och utanför enheten.

Tillgång

Servern är fullt tillgänglig på alla sidor i alla höjder för operatören

Stöd

Oberoende stabil för att stödja servrar i racket

Utför alla funktioner
1. Transport
Dörrar och hissar
Golvhinder
2. Position
Höjd
Justering (sida till sida)
Justering (fram till bak)
3. Installera / ta bort
Stabilitet
Tillgång
Stöd

* Both the 600RS and the RL400 devices only go up to 40U and require additional accessory purchases in order to accommodate racks of standard height of 42U. Racklift™ states that the 600C is customizable.

RackLift™ is a trademark licensed to BIAC Broadband USA Inc.

Varför våra kunder litar på servern®

[grw id="24503"]
Tala med en specialist för att hitta rätt lyftlösning för ditt datacenter.

Ladda ner vår GRATIS vitbok, "Data Center Migration Guide"

Optimering av IT-produktion är beroende av korrekt uppdatering och underhåll av din utrustning och datacenterfaciliteter. Använd vår gratis guidebok för att visualisera, planera och genomföra en datacentermigrering.

Data-Center-Migration-Guidebok-Cover

ange informationen nedan för att ladda ner whitepaper

Data Center Migration Guide

ange informationen nedan för att ladda ner whitepaper

Datacenterets säkerhetshandbok

ange informationen nedan för att ladda ner whitepaper

Bästa metoder för att flytta IT-avdelningen i datacentret

ange informationen nedan för att ladda ner whitepaper

Bästa metoder för hantering av datacenterutrustning

ange informationen nedan för att ladda ner whitepaper

Handbok för konsolidering av datacenterets vitbok

ange informationen nedan för att ladda ner whitepaper

Köpa en datacenterlyftanordning