ServerLIFT-Logo

Por que nós

As três regras
de um elevador de data center

Qualquer ferramenta de manipulação de servidor considerada para uso em um data center deve, no nível mais básico, ser capaz de executar com segurança e eficiência as funções essenciais necessárias de um elevador de data center.

ASSISTA PARA SABER MAIS

1
  TRANSPORTE

O equipamento de manuseio de servidor deve poder transportar servidores e outros equipamentos de TI em qualquer ambiente de datacenter. Um elevador de data center deve navegar efetivamente: 

  • Através de portas e elevadores de tamanho padrão
  • Corredores da sala do servidor com bandejas aéreas
  • Sobre obstruções comuns do piso

Portas e elevadores

ServerLIFT®’s tallest device, the SL-1000X® Elevador Super Duty, measures less than 6.5 feet (197 cm) tall, permitting it to move comfortably through any doorway or elevator. Using a ServerLIFT® device, your staff will not lose time or take risks transporting servers with push carts and then transferring them to the data center lift for an install.

Corredores

ServerLIFT® purpose-built devices allow operators to safely access both sides of the aisle without having to turn the device around. They were designed for ultimate practicality as they install and remove equipment from racks, without the need to rotate the lift in the aisle. Even better, our lifts can be locked into place using controls both on the brakes and the handles for safe positioning.

Obstruções

A ServerLIFT® machine has nearly a full inch of undercarriage clearance (0.9-inch [2.28 cm]) without compromising on how low it can install servers in a rack. It will not bottom out nor get stuck when traversing common obstacles or standard ADA ramps. It also has large wheels, making it easier to push with greater overall stability. Our data center lifts will not get stuck or tip over in any data center environment when used as instructed.

2
  POSIÇÃO

Um elevador de data center deve posicionar e dar suporte aos servidores de maneira precisa e constante para facilitar o trabalho dos operadores.

SL-500FX mastro telescópico de elevação de servidor para levantamento de data center

Altura

ServerLIFT® devices reach up to a minimum of 8.16 feet (98 inches [248.9 cm]), or, with the Elevador da plataforma RL-500 ™, a 9,5 pés (114 polegadas [289,5 cm]). O SL-1000X suporta servidores de até 265,7 cm de altura e também é compatível com o riser de plataforma RL-500 para alcance estendido quando necessário. Além disso, anexando um PL-500X™ Platform Extension to the ServerLIFT® device, equipment can reach the lowermost positions in a rack or cabinet and even all the way down to the floor.

Alinhamento lado a lado

All of ServerLIFT®’s devices have rigid platforms that will not sag, which can throw off side-to-side alignment and complicate the installation process. In addition, our lift platforms feature SmartTILT™ technology. An operator can adjust the platform angle in precise measure for proper alignment of the server with the rack posts. The shelf can be tilted up or down with a total range of 2 degrees for micro-leveling when an operator is working with heavy loads causing slight deflection.

Instalações de trilho para frente

ServerLIFT® designed its data center lifts to adjust the forward angle of servers using the Elevador de trilho RS-500X ™. This into-the-rack angling allows for easing equipment into slotted rails safely without manual effort. Your IT staff, equipped with ServerLIFT® solutions, will never have to struggle to line up the nail-heads of a server with the rail slots by hand ever again.

3
  INSTALAR / REMOVER

Data center lifts must effectively and safely assist in the installation and removal of servers to/from a rack.

Instalação do servidor SL-500FX

Suporte de equipamentos

ServerLIFT® platforms support servers into the server cabinet with ease. The ServerLIFT® SL-1000X®, SL-500X®e SL-350X® data center lifts feature a Sliding Shelf which extends 6 inches to each side for side-loading capability for a total of 12 inches of travel. The ServerLIFT® Elevador de carregamento frontal SL-500FX ™ é capaz de suportar equipamentos de até 20 ″ e colocá-los em qualquer rack de servidor. o Prateleira estendida FE-3X ™ is a valuable attachment, nearly doubling the forward reach of the SL-500FX™ platform.

Acesso do Operador

O ServerLIFT® winch-pulley-cable system lies outside of the platform lift area, and it is enclosed, protecting hands from potential pinch points. Its frame does not surround the platform, so it does not interfere with reaching the server from either side, back, or front.

Estabilidade

ServerLIFT® data center lifting devices can support any server within device capacity. They are designed for incredibly stable, yet freestanding installation and removal, and will not tip over while traversing uneven data center floors. Our dual-point stabilizer brakes are large and accessible for ease of use and lock down the lift, preventing any movement even when pulling a heavy server on or off the platform during a server move. ServerLIFT® equipment stays stable without the need for straps, although we do recommend straps to secure equipment to the lift for use during transport.

Comparação:
As 3 regras

de um dispositivo de elevação assistida por data center

  • Completa conformidade e funcionalidade
  • Conformidade e funcionalidade parciais
  • SEM conformidade e funcionalidade
ServerLIFT® RackLift™ Elevador do armazém

Executa todas as funções

SIM

NÃO

NÃO

1. Transporte

Portas e elevadores

Encaixa no tamanho padrão

Obstruções

Espaço livre para navegar sobre rampas, cabos, etc.

2. Posição

Altura

Atinge todas as posições do rack (até 58U)
*

Alinhamento (lado a lado)

Mantém o nível do servidor e alinhado com as postagens do rack

Alinhamento (frente para trás)

Inclina ou inclina o servidor para dentro / fora dos trilhos com fenda

3. Instalar / Remover

Estabilidade

A unidade geral trava no lugar sem a necessidade de suporte externo. A plataforma deslizante trava na posição para que o equipamento possa ser empurrado para dentro e para fora da unidade.

Acesso

O servidor é totalmente acessível em todos os lados e em todas as alturas para o operador

Apoio, suporte

Independentemente estável para suportar servidores no rack
Executa todas as funções
  • ServerLIFT®
  • RackLift™
  • Elevador do armazém
1. Transporte
Portas e elevadores
  • ServerLIFT®
  • RackLift™
  • Elevador do armazém
Obstruções
  • ServerLIFT®
  • RackLift™
  • Elevador do armazém
2. Posição
Altura
  • ServerLIFT®
  • * RackLift™
  • Elevador do armazém
Alinhamento (lado a lado)
  • ServerLIFT®
  • RackLift™
  • Elevador do armazém
Alinhamento (da frente para trás)
  • ServerLIFT®
  • RackLift™
  • Elevador do armazém
3. Instalar / Remover
Estabilidade
  • ServerLIFT®
  • RackLift™
  • Elevador do armazém
Acesso
  • ServerLIFT®
  • RackLift™
  • Elevador do armazém
Apoio, suporte
  • ServerLIFT®
  • RackLift™
  • Elevador do armazém

* Both the 600RS and the RL400 devices only go up to 40U and require additional accessory purchases in order to accommodate racks of standard height of 42U. Racklift™ states that the 600C is customizable.

RackLift™ is a trademark licensed to BIAC Broadband USA Inc.

Por que nossos clientes confiam no SERVERLIFT®

Without a ServerLIFT® data center lift here, customers, they would be...let’s just say, very displeased if we didn’t offer that sort of a service when they got there and they went to rack their gear and they needed something to help them. It’s something that they rely on.
Bill Cory,Flexencial
ServerLIFT® makes a great product that is easy to use, and promotes safety within the data center. It is especially useful to us in our new data centers, where we have standardized on 9ft. racks. I was most pleased with how easily it allowed us to move and re-rack our large AS/400 systems during a limited outage window.
Brad Gibbs,Suporte de data center líder
I would recommend it 100%. It literally has saved my team’s backs. This last year was our biggest year, and for us to do as much as we did (we did almost 200 racks in 6 months)...you can’t do that kind of work without having something that makes your job easier. ServerLIFT® solutions have taken all of that burden off of my team.
April Turner,Groupware Tech
I was initially using a manual lift to move servers and other equipment. When the ServerLIFT® electric model came out it was an even better solution. If I have a server that needs to be installed and I am the only one available, I can get it down quickly and easily with the ServerLIFT® unit.
Dave Reno,Gerente de TI
We have a ServerLIFT® solution and it’s awesome. It can lift 500 lbs without issue. Even the largest Cisco devices can be installed using it. Our facilities group uses it to pull motors from CRAC Units. It’s well worth the investment.
Dan Balitewicz,Gerente Sênior - Operações de Infraestrutura
In 15 minutes, we racked an HP chassis and 15 new hard drive enclosures, with only one engineer. Using our new ServerLIFT® lift is much safer and quicker than using 3 engineers.
Francisco Odiz, Triara
Safety is our #1 priority. Originally, we didn’t have the resources to install the hardware safely. We were using other brands of both battery- operated and hand-crank lifts, but they required too much maintenance. Now, our ServerLIFT® unit is well-used and everybody is happy with the 'Cadillac' we bought. It’s a great investment.
Rory Bennett,Gerente Sênior de Data Center, AT&T Mobility
O ServerLIFT® unit was of great benefit during the racking of our blade centers. With the use of the strap kit, one person was able to unbox and safely place the 300-pound device into a rack on the rails. The benefit of not having to remove the blades and power supply components from the chassis to make it lighter saved time and potential damage.
Ken WardEngenheiro Sr. Datacenter
Anterior
Próximo
[grw id="24503"]
Fale com um especialista para encontrar a solução de elevação certa para o seu data center.
Telefone: (844) 802-6532

Faça o download do nosso white paper gratuito, "O Guia de Migração do Data Center"

A otimização da produção de TI depende da atualização e manutenção adequadas dos equipamentos e das instalações do data center. Utilize nosso guia gratuito para visualizar, planejar e executar uma migração de data center.

Download It Now
Capa do guia de migração de data center
Main-ServerLIFT-Logo-Registered-AllWhite

17453 N 25th Ave
Phoenix, AZ 85023

Sobre nós

Elevadores de data center

Anexos

Recursos

Legal

  • Política de Privacidade
  • Terms of Purchase

Contate-Nos

Twitter Youtube Linkedin-in Facebook-f
OBTER SUPORTE
LIGUE: (844) 802-6532

TRANSPORTE SIMPLES, RÁPIDO E ENTREGA MUNDIAL.
DESCUBRA MAIS

© 2023 ServerLIFT® Corporation, All Rights Reserved.

digite as informações abaixo para fazer o download do whitepaper

O Guia de Migração do Data Center

Receba as informações mais recentes

Nós respeitamos sua privacidade e nunca venderemos, alugamos, arrendamos ou doamos suas informações a terceiros, nem lhe enviaremos e-mails não solicitados.

digite as informações abaixo para fazer o download do whitepaper

O Guia de Segurança do Data Center

digite as informações abaixo para fazer o download do whitepaper

Práticas recomendadas para mover o departamento de TI no data center

digite as informações abaixo para fazer o download do whitepaper

Práticas recomendadas para manipulação de equipamentos de data center

digite as informações abaixo para fazer o download do whitepaper

white paper do plano de ação de consolidação do data center

digite as informações abaixo para fazer o download do whitepaper

Compra de um dispositivo de elevação de data center