1 运输
服务器处理设备应能够在任何数据中心环境中传输服务器和其他IT设备。数据中心电梯必须有效地导航：
- 通过标准尺寸的门和电梯
- 服务器机房过道，带高架电缆桥架
- 常见的地板障碍物
门和电梯
ServerLIFT®’s tallest device, the SL-1000X® 超级升降机, measures less than 6.5 feet (197 cm) tall, permitting it to move comfortably through any doorway or elevator. Using a ServerLIFT® device, your staff will not lose time or take risks transporting servers with push carts and then transferring them to the data center lift for an install.
过道
ServerLIFT® purpose-built devices allow operators to safely access both sides of the aisle without having to turn the device around. They were designed for ultimate practicality as they install and remove equipment from racks, without the need to rotate the lift in the aisle. Even better, our lifts can be locked into place using controls both on the brakes and the handles for safe positioning.
地板障碍物
A ServerLIFT® machine has nearly a full inch of undercarriage clearance (0.9-inch [2.28 cm]) without compromising on how low it can install servers in a rack. It will not bottom out nor get stuck when traversing common obstacles or standard ADA ramps. It also has large wheels, making it easier to push with greater overall stability. Our data center lifts will not get stuck or tip over in any data center environment when used as instructed.
2 位置
数据中心升降机必须精确，稳定地定位和支撑服务器，以使操作员轻松进行工作。
高度
ServerLIFT® devices reach up to a minimum of 8.16 feet (98 inches [248.9 cm]), or, with the RL-500™平台提升板到9.5英尺（114英寸[289.5厘米]）。 SL-1000X支持最高8.75英尺（105英寸[266.7厘米]）的服务器，并且还与RL-500平台提升板兼容，以在需要时进行扩展。另外，通过附加一个 PL-500X™ 平台扩展 to the ServerLIFT® device, equipment can reach the lowermost positions in a rack or cabinet and even all the way down to the floor.
左右对齐
All of ServerLIFT®’s devices have rigid platforms that will not sag, which can throw off side-to-side alignment and complicate the installation process. In addition, our lift platforms feature SmartTILT™ technology. An operator can adjust the platform angle in precise measure for proper alignment of the server with the rack posts. The shelf can be tilted up or down with a total range of 2 degrees for micro-leveling when an operator is working with heavy loads causing slight deflection.
前轨安装
ServerLIFT® designed its data center lifts to adjust the forward angle of servers using the AP-500X™ Rail Lift. This into-the-rack angling allows for easing equipment into slotted rails safely without manual effort. Your IT staff, equipped with ServerLIFT® solutions, will never have to struggle to line up the nail-heads of a server with the rail slots by hand ever again.
3 INSTALLATION/REMOVAL
Data center lifts must effectively and safely assist in the installation and removal of servers to/from a rack.
设备支持
ServerLIFT® platforms support servers into the server cabinet with ease.
ServerLIFT® SL-1000X®, SL-500X®和 SL-350X® 数据中心升降机具有一个滑动架，该滑动架向两侧延伸6英寸，以实现侧向装载能力，总共可移动12英寸。
ServerLIFT® SL-500FX™前部装载升降机 能够支持最大20英寸的设备并将其放置在任何服务器机架中。的 FE-3X™扩展架 is a valuable attachment, nearly doubling the forward reach of the SL-500FX™ platform.
操作员访问
ServerLIFT® winch-pulley-cable system lies outside of the platform lift area, and it is enclosed, protecting hands from potential pinch points. Its frame does not surround the platform, so it does not interfere with reaching the server from either side, back, or front.
稳定性
ServerLIFT® data center lifting devices can support any server within device capacity. They are designed for incredibly stable, yet freestanding installation and removal, and will not tip over while traversing uneven data center floors. Our dual-point stabilizer brakes are large and accessible for ease of use and lock down the lift, preventing any movement even when pulling a heavy server on or off the platform during a server move. ServerLIFT® equipment stays stable without the need for straps, although we do recommend straps to secure equipment to the lift for use during transport.
Comparison: The 3 Rules
数据中心辅助提升设备
- 完全合规性和功能性
- 部分合规性和功能
- 没有合规性和功能性
| ServerLIFT® | 仓库升降机 | |
|---|---|---|
执行所有功能 |
是 |
没有 |
1.运输 |
||
门和电梯适合标准尺寸 |
|
|
|
地板障碍物 可以浏览坡道，电缆等的间隙 |
|
|
2.职位 |
||
|
高度 到达所有机架位置（最大58U） |
|
|
|
对齐（并排） 保持服务器水平并与机架柱对齐 |
|
|
|
对齐（从前到后） 将服务器倾斜或倾斜到滑槽中 |
|
|
3.安装/删除 |
||
|
稳定性 整个单元锁定到位，无需外部支持。滑动平台锁定到位，以便可以将设备推入和推下设备。 |
|
|
|
访问 操作员可以从各个高度全面访问服务器 |
|
|
|
支持 独立稳定，可将服务器支持到机架中 |
|
|
执行所有功能
- ServerLIFT®
- RackLift™
- 仓库升降机
1.运输
Doors & Elevators
- ServerLIFT®
- RackLift™
- 仓库升降机
地板障碍物
- ServerLIFT®
- RackLift™
- 仓库升降机
2.职位
高度
- ServerLIFT®
- * RackLift™
- 仓库升降机
对齐（左右对齐）
- ServerLIFT®
- RackLift™
- 仓库升降机
对齐（从前到后）
- ServerLIFT®
- RackLift™
- 仓库升降机
3.安装/删除
稳定性
- ServerLIFT®
- RackLift™
- 仓库升降机
访问
- ServerLIFT®
- RackLift™
- 仓库升降机
支持
- ServerLIFT®
- RackLift™
- 仓库升降机
* Both the 600RS and the RL400 devices only go up to 40U and require additional accessory purchases in order to accommodate racks of standard height of 42U.
Why Our Customers Rely on ServerLIFT®
[grw ID =“24503”]
与专家联系，为您的数据中心找到合适的起重解决方案。
ServerLIFT LLC
N 25th Ave 17453
亚利桑那州凤凰城85023
(844) 802-6532
Business Hours
8 AM – 5PM MST
数据中心电梯
附件
资源资源
© 2025 ServerLIFT LLC, All Rights Reserved.
