Tìm kiếm
Close this search box.

Tại sao là chúng tôi

Ba quy tắc
của thang máy trung tâm dữ liệu

Bất kỳ công cụ xử lý máy chủ nào được xem xét để sử dụng trong trung tâm dữ liệu phải, ở mức cơ bản nhất, có thể thực hiện an toàn và hiệu quả các chức năng thiết yếu cần thiết từ thang máy của trung tâm dữ liệu.

1
  VẬN CHUYỂN

Thiết bị xử lý máy chủ phải có khả năng vận chuyển máy chủ và các thiết bị CNTT khác xung quanh bất kỳ môi trường trung tâm dữ liệu nào. Thang máy trung tâm dữ liệu phải điều hướng hiệu quả: 

  • Thông qua cửa kích thước tiêu chuẩn và thang máy
  • Lối đi của phòng máy chủ với khay cáp trên cao
  • Vượt chướng ngại vật trên sàn chung

Cửa và thang máy

Máy chủ®’s tallest device, the SL-1000X® Siêu nâng, measures less than 6.5 feet (197 cm) tall, permitting it to move comfortably through any doorway or elevator. Using a ServerLIFT® device, your staff will not lose time or take risks transporting servers with push carts and then transferring them to the data center lift for an install.

Lối đi

Máy chủ® purpose-built devices allow operators to safely access both sides of the aisle without having to turn the device around. They were designed for ultimate practicality as they install and remove equipment from racks, without the need to rotate the lift in the aisle. Even better, our lifts can be locked into place using controls both on the brakes and the handles for safe positioning.

Vật cản sàn

A ServerLIFT® machine has nearly a full inch of undercarriage clearance (0.9-inch [2.28 cm]) without compromising on how low it can install servers in a rack. It will not bottom out nor get stuck when traversing common obstacles or standard ADA ramps. It also has large wheels, making it easier to push with greater overall stability. Our data center lifts will not get stuck or tip over in any data center environment when used as instructed.

2
  CHỨC VỤ

Thang máy trung tâm dữ liệu phải định vị và hỗ trợ các máy chủ chính xác và ổn định để giúp người vận hành dễ dàng thực hiện công việc của họ.

Trung tâm dữ liệu nâng máy chủ SL-500FX nâng kính viễn vọng

Chiều cao

Máy chủ® devices reach up to a minimum of 8.16 feet (98 inches [248.9 cm]), or, with the Trình tạo nền tảng RL-500 ™, đến 9,5 feet (114 inch [289,5 cm]). SL-1000X hỗ trợ các máy chủ cao tới 8,75 feet (105 inch [266,7 cm]) và cũng tương thích với RL-500 Platform Riser để mở rộng phạm vi khi cần. Ngoài ra, bằng cách đính kèm một PL-500X™ Platform Extension to the ServerLIFT® device, equipment can reach the lowermost positions in a rack or cabinet and even all the way down to the floor.

Căn lề bên

All of ServerLIFT®’s devices have rigid platforms that will not sag, which can throw off side-to-side alignment and complicate the installation process. In addition, our lift platforms feature SmartTILT™ technology. An operator can adjust the platform angle in precise measure for proper alignment of the server with the rack posts. The shelf can be tilted up or down with a total range of 2 degrees for micro-leveling when an operator is working with heavy loads causing slight deflection.

Chuyển tiếp đường sắt cài đặt

Máy chủ® designed its data center lifts to adjust the forward angle of servers using the Nâng đường ray RS-500X ™. This into-the-rack angling allows for easing equipment into slotted rails safely without manual effort. Your IT staff, equipped with ServerLIFT® solutions, will never have to struggle to line up the nail-heads of a server with the rail slots by hand ever again.

3
  CÀI ĐẶT / KHÁM PHÁ

Data center lifts must effectively and safely assist in the installation and removal of servers to/from a rack.

Cài đặt máy chủ SL-500FX

Hỗ trợ thiết bị

Máy chủ® platforms support servers into the server cabinet with ease. The ServerLIFT® SL-1000X®, SL-500X®SL-350X® data center lifts feature a Sliding Shelf which extends 6 inches to each side for side-loading capability for a total of 12 inches of travel. The ServerLIFT® Nâng tải trước SL-500FX ™ có khả năng hỗ trợ thiết bị lên đến 20 và đặt nó vào bất kỳ giá đỡ máy chủ nào. Các Kệ mở rộng FE-3X ™ is a valuable attachment, nearly doubling the forward reach of the SL-500FX™ platform.

Truy cập toán tử

Máy chủ® winch-pulley-cable system lies outside of the platform lift area, and it is enclosed, protecting hands from potential pinch points. Its frame does not surround the platform, so it does not interfere with reaching the server from either side, back, or front.

Ổn định

Máy chủ® data center lifting devices can support any server within device capacity. They are designed for incredibly stable, yet freestanding installation and removal, and will not tip over while traversing uneven data center floors. Our dual-point stabilizer brakes are large and accessible for ease of use and lock down the lift, preventing any movement even when pulling a heavy server on or off the platform during a server move. ServerLIFT® equipment stays stable without the need for straps, although we do recommend straps to secure equipment to the lift for use during transport.

So sánh:
3 quy tắc

của một trung tâm dữ liệu hỗ trợ thiết bị nâng

ServerLIFT® RackLift™ Thang máy kho

Thực hiện tất cả các chức năng

ĐÚNG

KHÔNG

KHÔNG

1. Giao thông vận tải

Cửa và thang máy

Phù hợp với kích thước tiêu chuẩn

Vật cản sàn

Giải phóng mặt bằng để điều hướng trên đường dốc, cáp, vv

2. Vị trí

Chiều cao

Đạt đến tất cả các vị trí giá đỡ (tối đa 58U)

*

Căn chỉnh (Side-to-side)

Giữ mức máy chủ và liên kết với bài viết giá

Căn chỉnh (Front-to-back)

Máy chủ góc hoặc nghiêng vào / ra khỏi đường ray có rãnh

3. Cài đặt / Xóa

Ổn định

Tổng thể khóa đơn vị tại chỗ mà không cần hỗ trợ bên ngoài. Khóa trượt nền tảng vào vị trí để thiết bị có thể được đẩy vào và ra khỏi thiết bị.

Truy cập

Máy chủ có thể truy cập đầy đủ ở tất cả các phía ở mọi độ cao cho người vận hành

Ủng hộ

Ổn định độc lập để hỗ trợ máy chủ vào giá đỡ

Thực hiện tất cả các chức năng
1. Giao thông vận tải
Cửa & Thang máy
Vật cản sàn
2. Vị trí
Chiều cao
Căn (Side to Side)
Căn (Mặt trước để Quay lại)
3. Cài đặt / Xóa
Ổn định
Truy cập
Ủng hộ

* Both the 600RS and the RL400 devices only go up to 40U and require additional accessory purchases in order to accommodate racks of standard height of 42U. Racklift™ states that the 600C is customizable.

RackLift™ is a trademark licensed to BIAC Broadband USA Inc.

Tại sao KHÁCH HÀNG CỦA CHÚNG TÔI LIÊN QUAN ĐẾN SERVERLift®

[grw id="24503"]
Nói chuyện với một chuyên gia để tìm giải pháp nâng phù hợp cho trung tâm dữ liệu của bạn.

Tải xuống sách trắng MIỄN PHÍ của chúng tôi, "Hướng dẫn di chuyển trung tâm dữ liệu"

Tối ưu hóa sản xuất CNTT phụ thuộc vào việc cập nhật và bảo trì đúng cách thiết bị và cơ sở trung tâm dữ liệu của bạn. Sử dụng sách hướng dẫn miễn phí của chúng tôi để trực quan hóa, lập kế hoạch và thực hiện di chuyển trung tâm dữ liệu.

Trung tâm dữ liệu-Di chuyển-Sách hướng dẫn-Bìa

nhập thông tin bên dưới để tải về whitepaper

Hướng dẫn di chuyển trung tâm dữ liệu

nhập thông tin bên dưới để tải về whitepaper

Sách hướng dẫn an toàn trung tâm dữ liệu

nhập thông tin bên dưới để tải về whitepaper

Thực tiễn tốt nhất để di chuyển Phòng CNTT trong Trung tâm dữ liệu

nhập thông tin bên dưới để tải về whitepaper

Thực tiễn tốt nhất để xử lý thiết bị trung tâm dữ liệu

nhập thông tin bên dưới để tải về whitepaper

trung tâm dữ liệu kế hoạch hành động hợp nhất giấy trắng

nhập thông tin bên dưới để tải về whitepaper

Mua một thiết bị nâng trung tâm dữ liệu