Menu
Get a Quote
Hvorfor os

De tre regler
af en datacenterløft

Ethvert serverhåndteringsværktøj, der overvejes til brug i et datacenter, skal på det mest basale niveau være i stand til sikkert og effektivt at udføre de væsentlige funktioner, der er nødvendige fra et datacenterløft.

Watch To Learn

1
  TRANSPORTERE

Serverhåndteringsudstyr skal være i stand til at transportere servere og andet it-udstyr omkring ethvert datacentermiljø. En datacentrallift skal effektivt navigere: 

  • Gennem standarddøre og døre
  • Serverrumsgange med faste kabelbakker
  • Over almindelige bundhindringer

Døre og elevatorer

ServerLIFTs højeste enhed, the SL-1000X® Super-Duty Lift, measures less than 6.5 feet (197 cm) tall, permitting it to move comfortably through any doorway or elevator. Using a ServerLIFT® device, your staff will not lose time or take risks transporting servers with push carts and then transferring them to the data center lift for an install.

gangene

ServerLIFT® purpose-built devices allow operators to safely access both sides of the aisle without having to turn the device around. They were designed for ultimate practicality as they install and remove equipment from racks, without the need to rotate the lift in the aisle. Even better, our lifts can be locked into place using controls both on the brakes and the handles for safe positioning.

Gulvhindringer

A ServerLIFT® machine has nearly a full inch of undercarriage clearance (0.9-inch [2.28 cm]) without compromising on how low it can install servers in a rack. It will not bottom out nor get stuck when traversing common obstacles or standard ADA ramps. It also has large wheels, making it easier to push with greater overall stability. Our data center lifts will not get stuck or tip over in any data center environment when used as instructed.

2
  POSITION

En datacentrallift skal placere og understøtte servere præcist og støt for at gøre det nemt for operatørerne at udføre deres arbejde.

SL-500FX-serverlift-datacenter-teleskopmast

Højde

ServerLIFT® devices reach up to a minimum of 8.16 feet (98 inches [248.9 cm]), or, with the RL-500 ™, to 9.5 feet (114 inches [289.5 cm]). The SL-1000X® supports servers up to 8.75 feet high (105 inches [266.7 cm]) and is also compatible with the RL-500™ Extension for extended reach when required. In addition, by attaching a PL-500X™ to the ServerLIFT® device, equipment can reach the lowermost positions in a rack or cabinet and even all the way down to the floor.

Side-til-side-justering

All of the ServerLIFT® devices have rigid platforms that will not sag, which can throw off side-to-side alignment and complicate the installation process. In addition, our lift platforms feature SmartTILT™ technology. An operator can adjust the platform angle in precise measure for proper alignment of the server with the rack posts. The shelf can be tilted up or down with a total range of 2 degrees for micro-leveling when an operator is working with heavy loads causing slight deflection.

Fremadgående jernbaneinstallationer

ServerLIFT® designed its data center lifts to adjust the forward angle of servers using the RS-500X ™ skinneløft. This into-the-rack angling allows for easing equipment into slotted rails safely without manual effort. Your IT staff, equipped with ServerLIFT® solutions, will never have to struggle to line up the nail-heads of a server with the rail slots by hand ever again.

3
  INSTALLATION/REMOVAL

Data center lifts must effectively and safely assist in the installation and removal of servers to/from a rack.

SL-500FX-serverinstallation

Støtte til udstyr

ServerLIFT® platforms support servers into the server cabinet with ease.

ServerLIFT SL-1000X®, SL-500X®, og SL-350X® Datacenterlifter har en glidende hylde, der strækker sig 6 tommer til hver side for sidelastningskapacitet i alt 12 tommer rejse.

ServerLIFT SL-500FX ™ Frontlæsselift er i stand til at understøtte udstyr op til 20 ″ og placere det i ethvert server rack. Det FE-3X ™ udvidet hylde is a valuable attachment, nearly doubling the forward reach of the SL-500FX™ platform.

Operatøradgang

ServerLIFT® winch-pulley-cable system lies outside of the platform lift area, and it is enclosed, protecting hands from potential pinch points. Its frame does not surround the platform, so it does not interfere with reaching the server from either side, back, or front.

Stabilitet

ServerLIFT® data center lifting devices can support any server within device capacity. They are designed for incredibly stable, yet freestanding installation and removal, and will not tip over while traversing uneven data center floors. Our dual-point stabilizer brakes are large and accessible for ease of use and lock down the lift, preventing any movement even when pulling a heavy server on or off the platform during a server move. ServerLIFT® equipment stays stable without the need for straps, although we do recommend straps to secure equipment to the lift for use during transport.

Comparison: The 3 Rules

af en datacenterassisteret løfteenhed

  • FULL Overholdelse og funktionalitet
  • DEL DEL Overholdelse og funktionalitet
  • INGEN overholdelse og funktionalitet
ServerLIFT® Lagerhejs

Udfører alle funktioner

JA

INGEN

1. Transport

Døre og elevatorer

Passer gennem standardstørrelse

Gulvhindringer

Afstand til at navigere over ramper, kabler osv.

2. Position

Højde

Nåer alle rackstillinger (op til 58U)

Justering (side til side)

Holder serverniveau og justeres efter rackindlæg

Justering (front-to-back)

Vinkler eller vipper serveren ind / ud af slidsede skinner

3. Installer / fjern

Stabilitet

Den samlede enhed låses på plads uden at kræve support udefra. Skubplatformen låses på plads, så udstyr kan skubbes til og fra enheden.

Adgang

Serveren er fuldt tilgængelig på alle sider i alle højder for operatøren

Support

Uafhængigt stabil til at understøtte servere i racket
Udfører alle funktioner
  • ServerLIFT®
  • RackLift™
  • Lagerhejs
1. Transport
Døre og elevatorer
  • ServerLIFT®
  • RackLift™
  • Lagerhejs
Gulvhindringer
  • ServerLIFT®
  • RackLift™
  • Lagerhejs
2. Position
Højde
  • ServerLIFT®
  • * RackLift™
  • Lagerhejs
Justering (side til side)
  • ServerLIFT®
  • RackLift™
  • Lagerhejs
Justering (front to back)
  • ServerLIFT®
  • RackLift™
  • Lagerhejs
3. Installer / fjern
Stabilitet
  • ServerLIFT®
  • RackLift™
  • Lagerhejs
Adgang
  • ServerLIFT®
  • RackLift™
  • Lagerhejs
Support
  • ServerLIFT®
  • RackLift™
  • Lagerhejs

Both the 600RS and the RL400 devices only go up to 40U and require additional accessory purchases in order to accommodate racks of standard height of 42U.

Why Our Customers Rely on ServerLIFT®

Without a ServerLIFT® data center lift here, customers, they would be...let’s just say, very displeased if we didn’t offer that sort of a service when they got there and they went to rack their gear and they needed something to help them. It’s something that they rely on.
Bill Cory,Flexential
ServerLIFT® makes a great product that is easy to use, and promotes safety within the data center. It is especially useful to us in our new data centers, where we have standardized on 9ft. racks. I was most pleased with how easily it allowed us to move and re-rack our large AS/400 systems during a limited outage window.
Brad Gibbs,Lead Data Center Support
I would recommend it 100%. It literally has saved my team’s backs. This last year was our biggest year, and for us to do as much as we did (we did almost 200 racks in 6 months)...you can’t do that kind of work without having something that makes your job easier. ServerLIFT® solutions have taken all of that burden off of my team.
April Turner,Groupware Tech
I was initially using a manual lift to move servers and other equipment. When the ServerLIFT® electric model came out it was an even better solution. If I have a server that needs to be installed and I am the only one available, I can get it down quickly and easily with the ServerLIFT® unit.
Dave Reno,IT Manager
We have a ServerLIFT® solution and it’s awesome. It can lift 500 lbs without issue. Even the largest Cisco devices can be installed using it. Our facilities group uses it to pull motors from CRAC Units. It’s well worth the investment.
Dan Balitewicz,Sr.chef - infrastrukturdrift
In 15 minutes, we racked an HP chassis and 15 new hard drive enclosures, with only one engineer. Using our new ServerLIFT® lift is much safer and quicker than using 3 engineers.
Francisco Odiz, Triara
Safety is our #1 priority. Originally, we didn’t have the resources to install the hardware safely. We were using other brands of both battery- operated and hand-crank lifts, but they required too much maintenance. Now, our ServerLIFT® unit is well-used and everybody is happy with the 'Cadillac' we bought. It’s a great investment.
Rory Bennett,Senior Data Center Manager, AT&T Mobility
ServerLIFT® unit was of great benefit during the racking of our blade centers. With the use of the strap kit, one person was able to unbox and safely place the 300-pound device into a rack on the rails. The benefit of not having to remove the blades and power supply components from the chassis to make it lighter saved time and potential damage.
Ken Ward,Sr Datacenter Engineer
[grw id="24503"]
Tal med en specialist for at finde den rigtige løfteløsning til dit datacenter.
ring: (844) 802-6532

Download vores GRATIS hvidbog, "Datacenterets migrationsguide"

Optimering af IT-produktion er afhængig af korrekt opdatering og vedligeholdelse af dit udstyr og datacenterfaciliteter. Brug vores gratis vejledning til at visualisere, planlægge og udføre en datacentermigrering.

Download det nu
Data-center-Migration-Guidebook-Cover

ServerLIFT LLC

17453 N 25th Ave
Phoenix, AZ 85023

(844) 802-6532

Business Hours
8 AM – 5PM MST

Lift til datacenter

Vedhæftede filer

Ressourcer

Kontakt os

Customer support portal

Youtube Linkedin-in Facebook-f
få et citat
FÅ HJÆLP
RING: (844) 802-6532

SIMPLE, FAST SHIPPING AND WORLDwIDE DELIVERY.

© 2025 ServerLIFT LLC, All Rights Reserved.

Fortrolighedspolitik

indtast nedenstående oplysninger for at downloade whitepaper

Migreringsguiden til Datacenter

indtast nedenstående oplysninger for at downloade whitepaper

Vejledningen til datacenteret

indtast nedenstående oplysninger for at downloade whitepaper

Bedste fremgangsmåder til at flytte IT-afdelingen i Datacenteret

indtast nedenstående oplysninger for at downloade whitepaper

Bedste fremgangsmåder til håndtering af datacenterudstyr

indtast nedenstående oplysninger for at downloade whitepaper

handlingsplan for konsolidering af datacentre hvidbog

indtast nedenstående oplysninger for at downloade whitepaper

Købe en Løfteenhed til datacenter