Zoeken
Sluit dit zoekvak.

Waarom wij

De drie regels
van een datacenterlift

Elk hulpmiddel voor serverafhandeling dat in aanmerking komt voor gebruik in een datacenter, moet op het meest basale niveau veilig en efficiënt de essentiële functies kunnen uitvoeren die nodig zijn vanaf een datacenterlift.

1
  VERVOER

Serverbehandelingsapparatuur moet servers en andere IT-apparatuur in elke datacenteromgeving kunnen transporteren. Een datacenterlift moet effectief navigeren: 

  • Door middel van standaard deuren en liften
  • Gangpaden in de serverruimte met kabelgoten boven het hoofd
  • Over gemeenschappelijke vloerobstakels

Deuren en liften

ServerLIFT®’s tallest device, the SL-1000X® Super-Duty Lift, measures less than 6.5 feet (197 cm) tall, permitting it to move comfortably through any doorway or elevator. Using a ServerLIFT® device, your staff will not lose time or take risks transporting servers with push carts and then transferring them to the data center lift for an install.

Gangpaden

ServerLIFT® purpose-built devices allow operators to safely access both sides of the aisle without having to turn the device around. They were designed for ultimate practicality as they install and remove equipment from racks, without the need to rotate the lift in the aisle. Even better, our lifts can be locked into place using controls both on the brakes and the handles for safe positioning.

Vloerobstakels

A ServerLIFT® machine has nearly a full inch of undercarriage clearance (0.9-inch [2.28 cm]) without compromising on how low it can install servers in a rack. It will not bottom out nor get stuck when traversing common obstacles or standard ADA ramps. It also has large wheels, making it easier to push with greater overall stability. Our data center lifts will not get stuck or tip over in any data center environment when used as instructed.

2
  POSITIE

Een datacenterlift moet servers nauwkeurig en gestaag positioneren en ondersteunen, zodat operators hun werk gemakkelijk kunnen doen.

SL-500FX serverlift datacenter lift telescopische mast

Hoogte

ServerLIFT® devices reach up to a minimum of 8.16 feet (98 inches [248.9 cm]), or, with the RL-500 ™ Platformverhoger, tot 9,5 voet (289,5 cm). De SL-1000X ondersteunt servers tot 8,75 voet hoog (105 inch [266,7 cm]) en is ook compatibel met de RL-500 Platform Riser voor een groter bereik indien nodig. Bovendien, door een PL-500X™ Platform Extension to the ServerLIFT® device, equipment can reach the lowermost positions in a rack or cabinet and even all the way down to the floor.

Zij-aan-zij-uitlijning

All of ServerLIFT®’s devices have rigid platforms that will not sag, which can throw off side-to-side alignment and complicate the installation process. In addition, our lift platforms feature SmartTILT™ technology. An operator can adjust the platform angle in precise measure for proper alignment of the server with the rack posts. The shelf can be tilted up or down with a total range of 2 degrees for micro-leveling when an operator is working with heavy loads causing slight deflection.

Forward Rail Installaties

ServerLIFT® designed its data center lifts to adjust the forward angle of servers using the RS-500X ™ raillift. This into-the-rack angling allows for easing equipment into slotted rails safely without manual effort. Your IT staff, equipped with ServerLIFT® solutions, will never have to struggle to line up the nail-heads of a server with the rail slots by hand ever again.

3
  INSTALLEREN / VERWIJDEREN

Data center lifts must effectively and safely assist in the installation and removal of servers to/from a rack.

SL-500FX-server installeren

Apparatuurondersteuning

ServerLIFT® platforms support servers into the server cabinet with ease. The ServerLIFT® SL-1000X®, SL-500X®, en SL-350X® data center lifts feature a Sliding Shelf which extends 6 inches to each side for side-loading capability for a total of 12 inches of travel. The ServerLIFT® SL-500FX ™ Frontlaadlift is in staat apparatuur tot 20 supporting te ondersteunen en in elk serverrek te plaatsen. De FE-3X ™ Uitgebreide plank is a valuable attachment, nearly doubling the forward reach of the SL-500FX™ platform.

Operator toegang

De ServerLIFT® winch-pulley-cable system lies outside of the platform lift area, and it is enclosed, protecting hands from potential pinch points. Its frame does not surround the platform, so it does not interfere with reaching the server from either side, back, or front.

Stabiliteit

ServerLIFT® data center lifting devices can support any server within device capacity. They are designed for incredibly stable, yet freestanding installation and removal, and will not tip over while traversing uneven data center floors. Our dual-point stabilizer brakes are large and accessible for ease of use and lock down the lift, preventing any movement even when pulling a heavy server on or off the platform during a server move. ServerLIFT® equipment stays stable without the need for straps, although we do recommend straps to secure equipment to the lift for use during transport.

Vergelijking:
De 3 regels

van een Data Center Assisted Lifting Device

ServerLIFT® RackLift™ Magazijnlift

Voert alle functies uit

JA

NEE

NEE

1. Vervoer

Deuren en liften

Past door standaard maat

Vloerobstakels

Vrije ruimte om over hellingen, kabels, enz. Te navigeren

2. Positie

Hoogte

Bereikt alle rackposities (tot 58U)

*

Uitlijning (naast elkaar)

Houdt serverniveau op één lijn met rackposten

Uitlijning (van voor naar achter)

Hoeken of hellingen server in / uit sleuven rails

3. Installeer / verwijder

Stabiliteit

Algehele eenheid vergrendelt op zijn plaats zonder externe ondersteuning nodig te hebben. Schuifplatform vergrendelt in positie zodat apparatuur op en van de unit kan worden geschoven.

Toegang

Server is aan alle kanten op alle hoogtes volledig toegankelijk voor de operator

Ondersteuning

Onafhankelijk stabiel om servers in het rack te ondersteunen

Voert alle functies uit
1. Vervoer
Deuren en liften
Vloerobstakels
2. Positie
Hoogte
Uitlijning (van links naar rechts)
Uitlijning (van voor naar achter)
3. Installeer / verwijder
Stabiliteit
Toegang
Ondersteuning

* Both the 600RS and the RL400 devices only go up to 40U and require additional accessory purchases in order to accommodate racks of standard height of 42U. Racklift™ states that the 600C is customizable.

RackLift™ is a trademark licensed to BIAC Broadband USA Inc.

Waarom ONZE KLANTEN OP SERVERLIFT VERTROUWEN®

[grw id="24503"]
Praat met een specialist om de juiste tiloplossing voor uw datacenter te vinden.

Download onze GRATIS whitepaper "The Data Center Migration Guide"

Het optimaliseren van IT-productie is afhankelijk van het correct updaten en onderhouden van uw apparatuur en datacenterfaciliteiten. Gebruik onze gratis gids om een datacenter-migratie te visualiseren, plannen en uit te voeren.

Datacenter-migratie-gids-omslag

vul de onderstaande informatie in om de whitepaper te downloaden

De Data Center Migration Guide

vul de onderstaande informatie in om de whitepaper te downloaden

Het datacenter Veiligheidshandboek

vul de onderstaande informatie in om de whitepaper te downloaden

Best practices voor het verplaatsen van de IT-afdeling in het datacenter

vul de onderstaande informatie in om de whitepaper te downloaden

Best practices voor het omgaan met datacenterapparatuur

vul de onderstaande informatie in om de whitepaper te downloaden

witboek datacenter consolidatie actieplan

vul de onderstaande informatie in om de whitepaper te downloaden

Een datacenter-hefapparaat kopen