ServerLIFT logo
Menu
Get a Quote

ServerLIFT SL-350X® Hand-Cranked Data Center Lift

Vår Premium Hand-Cranked Data Center Lift

Guldstandardalternativet till motoriserade hissar, ServerLIFT SL-350X® Hand-Cranked Data Center Lift is the recommended choice for occasional server moves of equipment up to 350 lbs (159 kg). Each feature is designed to reduce joint stress and enable accurate alignment of data center equipment—and with no charging required. With the ServerLIFT SL-350X® Hand-Cranked Data Center Lift, one tech can safely and single-handedly load, transport, position, and install equipment weighing up to 350 lbs (159 kg).

  • UL-Listed

1.  We are the gold/industry standard.

2.  We are the ONLY UL/CE/FCC/IC-certified family.

3.  We have the safest data center lifts in the industry.

Compatible Attachments and Accessories

LE-500X™: Effortlessly unpack cargo from pallets and boxes.

PL-500X™: Perform floor-level installations with zero back strain.

GT-1000X™: Smoothly roll IT equipment in and out of rack slots.

RS-500X™: Perfectly align loads to fit J-Rails and other slotted guard rails.

RL-500 ™: Add 15.75 inches to your reach for top-rack installs that go smoothly.

VMH-500X™: Maintain stability while moving vertical chassis servers.

GR-500X™: Achieve precise positioning with omnidirectional ball bearings.

WS-1X™

WS-2X™: Expand your lifting shelf to 21” for even bigger IT systems.

WS-3X™: Achieve maximum support with a massive 30” shelf.

GS-1000XR™: Attach rollers to server racks for seamless installations and removals.

SE I ÅTGÄRD
Spec Sheet
Operator's Manual
ServerLIFT SL-350X® Data Center Lift Dimensions
bilagor

DATA CENTER-ANVÄNDNINGAR

Kraftfull handvevikon 1

Ibland servern flyttar

Ellyftalternativ

Ellyftalternativ

350 kg vikt

Lättare IT-hårdvara

Det ledande datacenterlyftet för sällsynta IT-maskinvaruflyttningar

Moving IT hardware by hand—even lightweight 2U and 4U servers—quickly becomes a physical and logistical pain for all data center operations. The ServerLIFT SL-350X® Hand-Cranked Data Center Lift was built with this in mind, offering an intuitive and easy-to-use solution for lighter IT hardware in any data center environment. Server support goes up to 52U high (8 ft or 2.44 m) to allow for easy and safe transport from the dock to the rack, and back again.  It can also traverse ramps and floor gradients (max. angle of 6 degrees.)

Fotavtryck (BxLxH): 24 x 44 x 69 tum
Vikt (lossat): 360 kg (163 kg)

Fraktdimmar (BxLxH): 26 x 45 x 78 tum
Fraktvikt: 462 Ib (210 kg)

Det smarta, prisvärda valet

The ServerLIFT SL-350X® Hand-Cranked Data Center Lift features a durable and ergonomic design in a light-duty unit. The powerful hand crank offers mechanically-advantaged lifting of IT equipment weighing up to 350 lbs (159 kg), meaning a tech no longer has to team up for risky manual lifts. Use the ServerLIFT SL-350X® Hand-Cranked Data Center Lift within aisles as narrow as 36″ wide (91 cm). Tilt and angle the server or other equipment by up to 2 degrees using the stable, micro-leveling platform.

Få ett citat

Säkerhet är vår högsta prioritet

ServerLIFT® server handling lifts are designed to be the data center professional’s safest and smartest decision. Ours is the only data center lift certified to meet US and global safety standards.

CE icon
FC logo
IC Logo
Man grabbing his back in pain

Danger in the Data Center​

"Manuell materialhantering är den främsta källan till kompensationsskador i den amerikanska arbetskraften, och fyra av fem av dessa skador kommer att påverka korsryggen."
- Arbetssäkerhets- och hälsovårdsadministrationen

"Över 36% av skador som involverade missade arbetsdagar var resultatet av axlar och ryggskador ... lyft av belastningar över 50 pund kommer att öka risken för skador."
- US Bureau of Labor

Ingen mer manuell lyft

IT-utrustningstillverkare specificerar vanligtvis att de använder två till fyra personer för hantering och installation. Även med fyra personer ökar manuellt lyftutrustning onödigt risken för olyckor. Manuell lyft försenar också andra kritiska datacenteruppgifter.

dålig lyftteknik
SL350X_ServerInstall_Parker-04

Spara tid och pengar med ServerLIFT®

Installing servers and related IT equipment by hand is both dangerous and inefficient. Depending on the number of people used to install equipment, data center efficiency can improve by up to 300% when using ServerLIFT® devices instead.

Two salaried employees installing a new piece of rack-mounted equipment weighing 75 pounds*, by hand, provides a perfect example. This task requires 30+ minutes of high-tension work per employee, risking muscle strain, pinched fingers, and other injuries. Conversely, a single tech using a ServerLIFT® data center lift can make the move in 15 minutes with no risk involved.

* monterad på racket - inga kablar eller anslutningar
Få ett citat
30 Day Money Back Guarantee

ServerLIFT® Guarantee

The ServerLIFT SL-350X® Hand-Cranked Data Center Lift is backed by a worry-free, 30-day Money-Back Guarantee.

30 Day Money Back Guarantee

ServerLIFT SL-350X® Hand-Cranked Data Center Lift FEATURES

Kompakt design

The open design of the ServerLIFT SL-350X® Hand-Cranked Data Center Lift maintains a minimal footprint while allowing for total accessibility. The lift’s slim 24-inch base navigates narrow aisles and fits through standard-size doorways and elevator doors without tipping. With a tight turning radius and retracting side shelf, operators can move freely around the data center lift and work on either side without having to squeeze through or risk getting hurt.

Robust, Mico-Leveling-plattform

The platform of the ServerLIFT SL-350X® Hand-Cranked Data Center Lift stays rigid and stable, even when lifting up to 350 lbs. (159 kg). This, along with the user-controlled micro-leveling SmartTILT™ shelf adjustment feature, provides the critical post-to-post alignment needed to precisely rack-mount any server, making installation a breeze.

Svängbara handtag svänger lätt
Som rapporterats av en av våra kunder: "På 15 minuter rackade vi in ett HP-chassi och 15 nya hårddiskkapslingar, med bara en ingenjör. Att använda vår nya hiss är mycket säkrare och snabbare än att använda tre ingenjörer."
Som rapporterats av en av våra kunder: "På 15 minuter rackade vi in ett HP-chassi och 15 nya hårddiskkapslingar, med bara en ingenjör. Att använda vår nya hiss är mycket säkrare och snabbare än att använda tre ingenjörer."
Dubbelpunktsstabilisatorbroms
The proprietary ServerLIFT® brake system prevents any movement when transferring equipment on or off the platform, holding the entire machine rigid and stable.
The proprietary ServerLIFT<sup>®</sup> brake system prevents any movement when transferring equipment on or off the platform, holding the entire machine rigid and stable.
Stora svängbara hjul
De stora hjulen fram och bak rullar lätt över alla hinder och kommer inte att markera datacentergolv. De främre hjulen kan låsas för enkel transport ner raka korridorer och gångar.
De stora hjulen fram och bak rullar lätt över alla hinder och kommer inte att markera datacentergolv. De främre hjulen kan låsas för enkel transport ner raka korridorer och gångar.
Kompakt design
The lift’s slim 24-inch (61 cm) base and oversized wheels smoothly navigate aisles, corners, and ramps while providing ample space for an operator — even in the narrowest of data center aisles. ServerLIFT®’s unique mast design keeps the retracted lift height low enough to fit through standard-size doorways and elevators.
The lift’s slim 24-inch (61 cm) base and oversized wheels smoothly navigate aisles, corners, and ramps while providing ample space for an operator — even in the narrowest of data center aisles. ServerLIFT<sup>®</sup>’s unique mast design keeps the retracted lift height low enough to fit through standard-size doorways and elevators.
Teleskopmast
When fully extended, the mast lifts the platform equipment surface up to 8 ft (2.44 m) high to reach the highest racks (52U, or over 58U when used with the RL-500™ Platform Riser attachment). As an added safety feature in height-restricted environments, the TouchSTOPⓇ overhead sensor prevents both structural and equipment damage by stopping the lift motor on contact with the ceiling or other overhead obstructions.
When fully extended, the mast lifts the platform equipment surface up to 8 ft (2.44 m) high to reach the highest racks (52U, or over 58U when used with the RL-500™ Platform Riser attachment). As an added safety feature in height-restricted environments, the TouchSTOPⓇ overhead sensor prevents both structural and equipment damage by stopping the lift motor on contact with the ceiling or other overhead obstructions.
Helt driven lyft
SL-500FX Front-Loading Powered Lift är kapabel att arbeta mer än en hel dag på en enda laddning och har en icke-hydraulisk, kraftig vinschmotor och ett läckessäkert AGM-batteri (Absorbed Glass Mat) som är säkra att använda i vilken datacentermiljö som helst. Enheten är utrustad med valet av ett 110V eller 220V 3-stegs laddningssystem.
SL-500FX Front-Loading Powered Lift är kapabel att arbeta mer än en hel dag på en enda laddning och har en icke-hydraulisk, kraftig vinschmotor och ett läckessäkert AGM-batteri (Absorbed Glass Mat) som är säkra att använda i vilken datacentermiljö som helst. Enheten är utrustad med valet av ett 110V eller 220V 3-stegs laddningssystem.
Få ett citat

FUNKTIONELLA BILDAR FÖR SL-350X®

GT-1000X Glide Table friktionsfri lossning av servrar

GT-1000X ™ Bi-Directional Glide Table hjälper dig att ladda och lasta av tunga servrar med en enda hand för att flytta en server utan stress ... varje gång.
Learn more »

installera server i drop-in rails

The RS-500X™ J-Rail Assist helps you quickly and accurately lower equipment into slotted rails.
Learn more »

extended-warranty-graphic-2

ServerLIFT® Extended Service Contracts are available in three- and five-year terms on the ServerLIFT SL-350X® Hand-Cranked Data Center Lift. Warranty extensions include a year-end or end-of-term on-site preventative maintenance service.
Learn more »

installera säkert på toppen av racket

Med RL-500 ™ Platform Riser kan du nå toppen av valfritt rack utan att träffa överbelastningar.
Learn more »

tillbehör till serverliftplattformstillägg

PL-500X® Platform Extension brings the reach of any ServerLIFT® machine down to the floor.
Läs mer »

bg-säkerhets fokus

LE-500X ™ Lift Extension hjälper till att lyfta tung IT-utrustning från pallar och ur lådor.
Läs mer »

Få ett citat

Blanketter och vanliga frågor

ServerLift®FAQS
sl-350x® Specifikationer
sl-350x® support documents

Why Our Customers Rely on ServerLIFT®

På 15 minuter rackade vi in ett HP-chassi och 15 nya hårddiskkapslingar, med bara en ingenjör. Att använda vår nya hiss är mycket säkrare och snabbare än att använda 3 ingenjörer.
Francisco Odiz, Triara
Without a ServerLIFT® data center lift here, customers, they would be...let’s just say, very displeased if we didn’t offer that sort of a service when they got there and they went to rack their gear and they needed something to help them. It’s something that they rely on.
Bill Cory,Flexential
Safety is our #1 priority. Originally, we didn’t have the resources to install the hardware safely. We were using other brands of both battery- operated and hand-crank lifts, but they required too much maintenance. Now, our ServerLIFT® unit is well-used and everybody is happy with the 'Cadillac' we bought. It’s a great investment.
Rory Bennett,Senior Data Center Manager, AT&T Mobility
I would recommend it 100%. It literally has saved my team’s backs. This last year was our biggest year, and for us to do as much as we did (we did almost 200 racks in 6 months)...you can’t do that kind of work without having something that makes your job easier. ServerLIFT® solutions have taken all of that burden off of my team.
April Turner,Groupware Tech
ServerLIFT® unit was of great benefit during the racking of our blade centers. With the use of the strap kit, one person was able to unbox and safely place the 300-pound device into a rack on the rails. The benefit of not having to remove the blades and power supply components from the chassis to make it lighter saved time and potential damage.
Ken Ward,Sr Datacenter Engineer
We have a ServerLIFT® solution and it’s awesome. It can lift 500 lbs without issue. Even the largest Cisco devices can be installed using it. Our facilities group uses it to pull motors from CRAC Units. It’s well worth the investment.
Dan Balitewicz,Sr.chef - infrastrukturoperationer
ServerLIFT® makes a great product that is easy to use, and promotes safety within the data center. It is especially useful to us in our new data centers, where we have standardized on 9ft. racks. I was most pleased with how easily it allowed us to move and re-rack our large AS/400 systems during a limited outage window.
Brad Gibbs,Lead Data Center Support
I was initially using a manual lift to move servers and other equipment. When the ServerLIFT® electric model came out it was an even better solution. If I have a server that needs to be installed and I am the only one available, I can get it down quickly and easily with the ServerLIFT® unit.
Dave Reno,IT-chef
[grw id="24503"]
Tala med en specialist för att hitta rätt lyftlösning för ditt datacenter.
call: 844-209-2674

Ladda ner vårt GRATIS vitbok, "Bästa metoder för att flytta IT-utrustning i datacentret"

Oavsett om operatörer utför standardfunktioner eller migrerar IT-utrustning mellan anläggningar, erbjuder vår gratis guidebok en värdefull checklista för att utföra en rörelse säkert och utan onödig risk.

Download It Now
Best-Practices-for-Moving-IT-Equipment-Guidebook-Cover-Mockup

ange informationen nedan för att ladda ner whitepaper

ange informationen nedan för att ladda ner whitepaper

ange informationen nedan för att ladda ner whitepaper

ange informationen nedan för att ladda ner whitepaper

ange informationen nedan för att ladda ner whitepaper

ange informationen nedan för att ladda ner whitepaper