We recently had an order that we shipped out, but it began to look as if it was not going to arrive on time to meet their deadline. We called our carrier and, even though this was happening right in the middle of the heavy-shipping-season holidays, they were able to get the unit to our
We have customers who rent our lifts for projects, then decide they just cannot live without one on hand whenever they want to remove, transport, and install a piece of equipment. Recently a customer rented a lift for a week-long project and loved it so much they purchased 4 new lifts for 3 of their
We get a lot of inquiries from our customers telling us that they think their lift needs an inspection, but are not sure where to start. The best and first place to start would be right in the Set Up section of the Operator’s Manual that comes with your lift. You will find tests for
A customer reached out to us via our web chat asking for pricing on another SL-350X® manual data center lift. They already have two, but will need more in the next year or so. They have our SL-1000X® Super-Duty lift at another campus, therefore they believed they did not have the space for an electric
We had a meeting with an IT engineer who provides installation/removal of servers and IT equipment to his customers. He mentioned that for most jobs they require two technicians for these installation/removal projects. They are getting push back from their customers, who are asking if it is necessary to send out two techs. The answer,
We were contacted by a customer via our webchat needing a few lifts by February for very heavy 300kg High Performance Computing servers for the HPC data center they are building internationally. Another requirement was that the lifts could go through standard-sized doorways, which of course ours do. We recommended our SL-1000X® Super-Duty lift, which
We’ve been working with a customer for some time about a rental they urgently needed onsite the week before the holidays. Of course we encouraged them to get their order in early, but not every company can push purchase orders through the red tape so easily. They finally sent it in. We pulled strings and
Our most popular attachments are the GT-1000X™ Glide Table and the LE-500X™ Lift Extension. Here’s why. The Glide Table has a series of rollers that let your servers glide back and forth over its surface for nearly frictionless equipment transfers on either side of an aisle. Especially great for the more narrow aisles. The Glide
Renting a lifting solution for an upcoming data center project can seem like a lot of work if you wait until the last minute. Here at ServerLIFT®, we do our best to make renting a data center lift as easy as possible, but things can get needlessly difficult if you haven’t planned ahead. Points to
A reseller partner reached out to get a quote for one of our lifts. One of their customers needed a lift that would be small enough to fit in their elevator and in their tiny server room. They also needed it to lift servers into racks that are 45U high. This reseller knew exactly who
A customer called in to let us know that he is passing our contact information over to his colleague so that the colleague can purchase a data center lift from us. Our customer said that he has three of our lifts and everyone always borrows them. “I have a hard time getting them back, because
Yes, we make both a manual lift, which is just as rugged and safe for your data center equipment moves as our motorized lifts. But we sell more motorized lifts. Why? It comes down to frequency and quantity. If you have a small data center and you move equipment very infrequently, our manual lift, which
We recently had an order that we shipped out, but it began to look as if it was not going to arrive on time to meet their deadline. We called our carrier and, even though this was happening right in the middle of the heavy-shipping-season holidays, they were able to get the unit to our
We have customers who rent our lifts for projects, then decide they just cannot live without one on hand whenever they want to remove, transport, and install a piece of equipment. Recently a customer rented a lift for a week-long project and loved it so much they purchased 4 new lifts for 3 of their
We get a lot of inquiries from our customers telling us that they think their lift needs an inspection, but are not sure where to start. The best and first place to start would be right in the Set Up section of the Operator’s Manual that comes with your lift. You will find tests for
A customer reached out to us via our web chat asking for pricing on another SL-350X® manual data center lift. They already have two, but will need more in the next year or so. They have our SL-1000X® Super-Duty lift at another campus, therefore they believed they did not have the space for an electric
We had a meeting with an IT engineer who provides installation/removal of servers and IT equipment to his customers. He mentioned that for most jobs they require two technicians for these installation/removal projects. They are getting push back from their customers, who are asking if it is necessary to send out two techs. The answer,
We were contacted by a customer via our webchat needing a few lifts by February for very heavy 300kg High Performance Computing servers for the HPC data center they are building internationally. Another requirement was that the lifts could go through standard-sized doorways, which of course ours do. We recommended our SL-1000X® Super-Duty lift, which
We’ve been working with a customer for some time about a rental they urgently needed onsite the week before the holidays. Of course we encouraged them to get their order in early, but not every company can push purchase orders through the red tape so easily. They finally sent it in. We pulled strings and
Our most popular attachments are the GT-1000X™ Glide Table and the LE-500X™ Lift Extension. Here’s why. The Glide Table has a series of rollers that let your servers glide back and forth over its surface for nearly frictionless equipment transfers on either side of an aisle. Especially great for the more narrow aisles. The Glide
Renting a lifting solution for an upcoming data center project can seem like a lot of work if you wait until the last minute. Here at ServerLIFT®, we do our best to make renting a data center lift as easy as possible, but things can get needlessly difficult if you haven’t planned ahead. Points to
A reseller partner reached out to get a quote for one of our lifts. One of their customers needed a lift that would be small enough to fit in their elevator and in their tiny server room. They also needed it to lift servers into racks that are 45U high. This reseller knew exactly who
A customer called in to let us know that he is passing our contact information over to his colleague so that the colleague can purchase a data center lift from us. Our customer said that he has three of our lifts and everyone always borrows them. “I have a hard time getting them back, because
Yes, we make both a manual lift, which is just as rugged and safe for your data center equipment moves as our motorized lifts. But we sell more motorized lifts. Why? It comes down to frequency and quantity. If you have a small data center and you move equipment very infrequently, our manual lift, which
A while back, our team was working through a particularly busy week. By the time Friday rolled around, we were all looking forward to our afternoon virtual team happy hour.
At 1PM we got a call from a company that was working on a project to install a couple dozen super heavy switches—all within a few days. The company was looking to rent a data center lift as a last resort in order to meet their deadline. Needless to say, they were in a bit of a panic.
Thankfully, the company was able to fast-track budget approval by 3PM, giving our team the green light to get to work. We all pulled together to get a rental machine prepped, packed, and out the door before 4PM that afternoon for a cross-country, Tuesday delivery. That made our happy hour very happy indeed.
ServerLIFT has a standing Buyback Program, which has been around for some time now. We buy back lifts that were used to handle servers when a customer purchases a new lift from us. One Fortune 500 company made great use out of the program this summer.
They sent us a number of their used lifts to use as credit towards the newer SL-500X model units they had recently purchased. The used lifts were no longer working and the company that made them is out of business.
We’re glad we were able to help our customer with the Buyback Program and continue our mission to eliminate manual server handling in every data center in the world.
We have been working with a data center industry leader for quite some time now. Like many other companies, their footprint is global, so standardizing something like a data center lifting tool requires global deployment.
We’ve gladly been able to work with them to rally the stakeholders in various regions—such as Asia Pacific—to save them tens of thousands on per-order shipping and importation costs. This was accomplished by coordinating and consolidating their orders to each region. A penny saved is a penny earned!
As a veteran-owned company, we always consider it a privilege to help out the troops who risk their lives for us every day. A military branch reached out to ServerLIFT recently—they didn’t want to put anyone at risk in their data center!
We worked with their limited budget—they were worried that they wouldn’t be able to get the ServerLIFT-brand solution they knew they so desperately needed to keep their essential people (and equipment) safe. Because we offer multiple ways to buy (including financing, leasing, and renting), we were able to work out a program that allowed them to buy it and stay within budget.
What an amazing opportunity this was to help our brothers and sisters in uniform. We were grateful to be able to do something for them in return.
We were speaking to a potential customer recently who let us know that they had purchased a Racklift instead of a ServerLIFT-brand lifting device. Once it arrived, they had to rig it to get it up a ramp, which they found to not only be dangerous but also useless because it could not fit in the right spots to lift their equipment. He told us: “The Racklift is too cumbersome, bulky, and difficult to use. It just sits in the corner and collects dust.” They no longer use the lift and are instead lifting equipment by hand, something we definitely do not recommend for safety reasons.
We explained our Buyback Program. He said that would be great for their situation; they could get rid of the Racklift and get a safely working lift at that location. We sent quotes on all four of our models with spec sheets and attachment information so the team could review and choose a ServerLIFT machine that best fits their use case. We just received their purchase order and are preparing for shipment.
A potential customer at a colocation data center said he had a lift on site. After some discussion, we were pretty sure it was one of the “warehouse lifts,” which tend to cause problems in data centers. Unlike our lifts, they are not specifically designed for data center use. He said they have to crank and crank it up and down, but that it eventually gets the job done. He did admit that it does not perform well with heavier equipment on it. He said that they are a very small data center and he is not sure he will be able to get approval for purchasing a data-center-centric lift. However, he did say, “Now, if you have one that has a button we can just push, then I’m listening!” I replied that we do actually have three models that are powered by one-touch lifting. He was very excited to get more information and present it to his team. He’s hoping he can get a ServerLIFT solution, which they are using on their other sites.
We checked in with a customer who has a couple of lifts. They told us they’re working out great. They said they loved them and that they are “built like tanks,” able to take all the abuse (not that we recommend abusing them!) they get from a variety of operators. After they started using them, he thought they were worth every penny, a true data-center-specific workhorse. He said he “appreciates and respects the ServerLIFT brand.” All of this just made our day!
オペレーターが標準機能を実行している場合でも、施設間でIT機器を移行している場合でも、無料のガイドブックには、不必要なリスクなしに安全に移動を実行するための貴重なチェックリストが用意されています。
ServerLIFT LLC
17453 N 25th Ave
フェニックス、アリゾナ州85023
(844) 802-6532
Business Hours
8 AM – 5PM MST
© 2025 ServerLIFT LLC, All Rights Reserved.
