SL-350X^® 手摇升降机

我们的高级手动数据中心电梯

The gold standard alternative to motorized lifts, the ServerLIFT^® SL-350X^Ⓡ 手动移动数据中心升降机是服务器偶尔移动的推荐选择。每个功能都旨在减少接头应力并实现数据中心设备的精确对准，并且无需充电。使用SL-350X举升机，一位技术人员可以安全，单手地装载，运输，定位和安装重达350磅（159千克）的设备。

数据中心应用

领先的数据中心提升功能，可应对不频繁的IT硬件移动

Moving IT hardware by hand—even lightweight 2U and 4U servers—quickly becomes a physical and logistical pain for all data center operations. The ServerLIFT^® SL-350X server handling lift was built with this in mind, offering an intuitive and easy-to-use solution for lighter IT hardware in any data center environment. Server support goes up to 52U high (8 ft or 2.44 m) to allow for easy and safe transport from the dock to the rack, and back again. It can also traverse ramps and floor gradients (max. angle of 6 degrees.)

脚印（WxLxH）：24 x 44 x 69英寸
重量（空载）：360磅（163公斤）

运送点心 （WxLxH）：26 x 45 x 78英寸 装运重量：462磅（210公斤）

经济实惠的明智选择

ServerLIFT^® SL-350X data center lift features a durable and ergonomic design in a light-duty unit. The powerful hand crank offers mechanically-advantaged lifting of IT equipment weighing up to 350 lbs (159 kg), meaning a tech no longer has to team up for risky manual lifts. Use the SL-350X data center lift within aisles as narrow as 36″ wide (91 cm). Tilt and angle the server or other equipment by up to 2 degrees using the stable, micro-leveling platform.

安全是我们的重中之重

ServerLIFT^® server handling lifts are designed to be the data center professional’s safest and smartest decision. Ours is the only data center lift certified to meet global safety standards, with a 100% accident-free record reported by our customers.

Danger in the Data Center

“在美国劳动力中，手工搬运材料是可补偿伤害的主要来源，其中五分之四的伤害会影响下背部。”
- 职业安全与健康管理局

“超过36%的受伤事故涉及肩负着工作日，这是肩部和背部受伤的结果……举起超过50磅的重物将增加受伤的风险。”
–美国劳工局

不再需要手动起重

IT设备制造商通常指定使用两到四个人来进行处理和安装。即使只有四个人，手动抬起设备也不必要地增加了发生事故的风险。手动提升还延迟了其他关键数据中心任务的执行。

使用ServerLIFT节省时间和金钱^®

Installing servers and related IT equipment by hand is both dangerous and inefficient. Depending on the number of people used to install equipment, data center efficiency can improve by up to 300% when using ServerLIFT^® devices instead.

Two salaried employees installing a new piece of rack-mounted equipment weighing 75 pounds*, by hand, provides a perfect example. This task requires 30+ minutes of high-tension work per employee, risking muscle strain, pinched fingers, and other injuries. Conversely, a single tech using a ServerLIFT^® data center lift can make the move in 15 minutes with no risk involved.

*安装在机架上-无需布线或连接

ServerLIFT^® Guarantee

The SL-350X Super-Duty Lift is backed by a worry-free, 30-day Money-Back Guarantee.

SL-350X功能

设计紧凑

SL-350X的开放式设计可将占用空间降至最低，同时实现全面的访问性。电梯的纤巧24英寸底座可在狭窄的通道中行驶，并且可通过标准尺寸的门道和电梯门而不会倾翻。凭借狭窄的转弯半径和可收回的侧架，操作员可以在数据中心升降机周围自由移动并在任一侧进行工作，而不必挤过或担心受伤。

坚固的Mico调平平台

SL-350X数据中心举升机的平台即使在举起重达350磅的情况下也保持刚性和稳定。（159公斤）。这与用户控制的Micro-leveling SmartTILT™架子调整功能一起，提供了精确地机架安装任何服务器所需的关键的后对后对准，使安装变得轻而易举。

旋转手柄轻松转动

正如我们的一位客户所报道的那样：“在15分钟内，我们仅由一名工程师就为一个HP机箱和15个新硬盘驱动器机架安装了机架。与使用3个工程师相比，使用我们的新电梯更安全，更快捷。”

双点稳定器刹车

The proprietary ServerLIFT^® brake system prevents any movement when transferring equipment on or off the platform, holding the entire machine rigid and stable.

大型万向脚轮

大型前后脚轮很容易在任何障碍物上滚动，不会标记数据中心地板。可以锁定前脚轮，以便于在直的走廊和过道中轻松运输。

紧凑的设计

The lift’s slim 24-inch (61 cm) base and oversized wheels smoothly navigate aisles, corners, and ramps while providing ample space for an operator — even in the narrowest of data center aisles. ServerLIFT^®’s unique mast design keeps the retracted lift height low enough to fit through standard-size doorways and elevators.

伸缩桅杆

完全展开后，桅杆可将平台设备表面提升至最高8英尺（2.44 m），以达到最高的机架（与RL-500 Riser卡座一起使用时，机架高度为52U，或超过58U）。作为在高度受限的环境中的一项附加安全功能，TouchSTOPⓇ高架传感器通过将提升电机与天花板或其他高架障碍物接触而停止，从而防止了结构和设备损坏。