- Easily mounts onto all ServerLIFT models.
- Fits into standard 19” racks.
- Requires no tools or assembly.
- Supports and angles equipment in or out of drop-in or slotted rails.
- Can be mounted in either of two orientations for access to the desired side of choice.
Angle In/Out of slotted rails with a ServerLIFT RS-500X™ Rail Lift
Many manufacturers are designing server racks using nail heads on the server, which are meant to line up with J-shaped slots on slide rails on the rack. Aligning these nail heads with the slots on the slotted rails and guiding them into (or out of) the J-shape of the slot is awkward, tricky, and time-consuming. Typically, this process requires you to get the server angle just right, so the rear nail heads install first, followed by the middle and front ones. Doing this while supporting equipment that can range from 50 to hundreds of pounds is daunting – and dangerous.
With the ServerLIFT RS-500X™ Rail Lift, this recurring process becomes easy for data center techs and installers. Used with a ServerLIFT SL-350X, SL-500X, SL-500FX, or SL-1000X, the RS-500X™ Rail Lift supports the equipment while giving the operator control over the angle of the server at all points of installation or removal from the rails.
The ServerLIFT RS-500X™ Rail Lift is a must-have accessory for every server room, data center, and manufacturing or integration facility.