The Current State of Data Center Safety

The Current State of Data Center Safety

Data centers are unique spaces that come with unique challenges. Each DC is designed differently depending on its geographic location, service providers, data storage types, etc. Cooling and power concerns are typically the biggest expense and therefore always top of mind. As a result, most feature restricted spaces that include narrow aisles and/or overhead/ground-level obstructions. And, no matter how they are configured, the handling of servers and other expensive, sensitive equipment is an often-overlooked challenge.

Rack-mounted data center devices are expensive, large, and oftentimes heavy. They should never be lifted by hand. 30 pounds is the limit for a person carrying items in an office or in another non-physical role. In a warehouse or industrial setting, the recommended limit for manual lifting of equipment from OSHA only goes up to 50 pounds. In any case, with dimensions of at least 17 inches wide and 30+ inches deep, even the lightest of rack-mounted servers are awkward to handle, physically speaking.

Some of the most common injuries in the IT industry include strains and sprains of the arms, shoulders, and back. The probability of an incident and its potential severity while conducting this type of work in a DC is significant,” notes Walter Leclerc, Director, Environmental Occupational Health and Safety at Digital Realty.

The Data Center Cultural Shift

The good news is that a global cultural change is taking place in data centers. The baseline expectation for safety standards in DC facilities is starting to shift quickly.

“Early on in the history of data centers . . . there was a lot of bootstrapping and there weren’t a lot of established standards. And one of the things we are seeing is that the industry is maturing. Facilities are starting to consolidate into similar kinds of standards across the world. A baseline expectation of facility safety and standards for most data centers has developed within the DC cultural consciousness,” says Brandon Budd, Vice President of Operations at ServerLIFT Corporation.

Expectations are increasing for both physical and digital standards. On the physical side of the spectrum, there is a greater focus on safer working conditions, improved compliance, and the reduction of bodily injuries. New occupational health and safety standards are being crafted in response. Informed and demanding customers now have a better understanding of the significant workplace hazards hidden within a data center.

“The cultural change has been brought on by incidents, an increased enforcement posture by government agencies, a better understanding in the workplace of safety hazards as well as rules and regulations, design improvements, and an overall culture shift in the DC industry,” says Leclerc.

Data Centers at Risk

Manual lifting carries great risk for both the operator and their employer. Injuries drive up the data center costs while limiting growth and expansion capabilities. There is a battle over the short supply of technical talent as it is, making losing a tech to a preventable injury or downtime even more costly. Aside from the significant threat to employee safety, there is also the potential damage to storage, processing, and distribution equipment. These risks are no longer going unnoticed in the industry.

A strategic roadmap to better safety standards, improved productivity, and cost reduction in the data center should include a physical solution that offsets the dangers and costs of injuries and accidents.

Safety First: Mechanical Server Handling 

A mechanical data center lift brings risk levels down to nearly zero when used properly. It is a safety-focused solution, designed for use in an IT infrastructure environment.

“I can see how a tech might not want to bring out the lift just to move one 50-pound  server. But it would only take one time for a tech to trip or drop that, and then they have to replace a $25,000 piece of equipment that only weighed 50 pounds,” says Budd.  

A server handling lift does the following for data center operations:

  • Speeds up work/efficiency
  • Server support with precise positioning and angling
  • Complies with global regulations

Getting Results with an Assisted Lifting Device

Digital Realty Manager of Remote Hands Services John Scoggins describes the process his operators used to move equipment before they purchased an ALD (assisted lifting device): “When installing a heavy piece of equipment into a cabinet, we would install a temporary equipment shelf using use the two-man rule while we lifted the equipment onto the shelf, to install it at a high-level RU position. Once the equipment was secure, we would remove the shelf.”

Scoggins says their first ALD was purchased when they had to install heavier customer-provided equipment. He says they were also getting requests from customers asking if they had a server handling device to assist with installations. Size and mobility were their top concerns. They now use it for server, switch, and router moves. “It sure makes the job safer and easier when they do use the ALD,” says Walter Leclerc.

Does Every Data Center Need an ALD?

“Any DC that has multiple racks and definitive aisles is probably big enough to benefit from it,” says Budd. “Even if they only need to install or remove a piece of equipment once or twice a year, the risk or chance of getting hurt or damaging something is high enough that it is worth making a one-time capital investment into something that prevents or mitigates against those risks.”

Leclerc says the ALD purchase feeds into that overall cultural change he is fostering within his company, Digital Realty. “I think this is really about the well-being of our employees, our safety culture, and continual improvement.”

Priority and risk variables come into play for safety issues, and they need to be considered before an ALD purchase. DC design is another factor: “How high are the racks? How narrow are the aisles? Is growth part of the business plan? Purchasing something that can do it all is really the number one thing,” says Budd.

Best Practices Leave Manual Lifting Behind

Many DC managers and owners have already made the switch to reduce costs and increase safety. The creation of a safe environment is weighed against budget and often results in a shift in overall mindset.

“What an ALD can do for a DC in terms of efficiency, cost reduction, morale of the staff, is all really just a bonus. At the end of the day, it tends to be a win-win for everyone,” says Budd.

Spanish-English Translations Now Available on All Data Center Lifts

ServerLIFT Corporation is announcing the immediate availability of bilingual Spanish-English documentation related to all data center lifts and accessories.

Introduced to expand customer access, and in compliance with European regulations, the newest additions to the ServerLIFT library of bilingual product instructions, operator’s manuals, spec sheets, brochures, and decals are critical for assisting an increasingly global audience. Spanish is the official language of 20 countries, and claims the second largest number of native speakers in the world.

“This announcement reflects the globalization efforts of ServerLIFT. Bilingual information will help maintain the high safety standard with a Spanish-speaking user base that is not familiar with the solution. It will make ServerLIFT more accessible to [our] region and will support  [our] education effort,” says Arieh Broide of RLA Power in Costa Rica.

ServerLIFT products streamline data center operations and provide a safe choice for transporting, positioning, installing, and removing server equipment. ServerLIFT has developed Spanish translations for products including:

Server-Lifting Machines:

  • ServerLIFT SL-500X: The best all-around solution with easy, one-touch electric lifting.
  • ServerLIFT SL-500FX: The ideal choice for facilities with wide aisles.
  • ServerLIFT SL-1000X: The premier safety-certified data center lift.
  • ServerLIFT SL-350X: A premium hand-cranked electric lift alternative. Great for infrequent moves.

Add-Ons:

  • LE-500X and LE-1000X Lift Extension: Removes equipment from boxes and off of pallets.
  • RL-500 Riser: Ideal for reaching taller server racks.
  • RS-500X Rail Lift: Angles equipment into and out of drop-in rails.

All of the documentation detailed above is available immediately by request. ServerLIFT users can obtain Spanish language documentation by calling (602) 254-1557 or by emailing sales@serverlift.com.

The release of Spanish-English bilingual product instructions, operator manuals, and more follows the well-received news of the availability of French-English translations for ServerLIFT equipment.

(Original press release can be found on PRWeb.)

 

Streamlining the Data Center: IT Infrastructure Trends

Streamlining the Data Center: IT Infrastructure Trends

Challenges for IT operations teams are growing. One of the ways many data center leaders are attempting to deal with these IT infrastructure struggles is by streamlining the DC environment.

Your team may be aiming for the elimination of redundant files or data, improvement of data integrity or security, or decreasing maintenance and operations costs. All three make sense. In this blog post, we will review the top data center trends for streamlining your unique DC environment.

No Data Center is the Same

There is no “typical” data center, says Phil Isaak of Isaak Technologies, and every space is unique. He notes, “Clients have different types of hardware, different mixes of hardware, and that affects the design of a data center.”

There is no typical solution, therefore, for the following issues:

  • Virtualization
  • Dropping IT budgets
  • Process automation

Isaak says it is important to ask some standard questions before considering a change: “What are the project requirements? What’s the best solution for that particular client, based on their specific data center needs . . . and operating practices and budget? Obviously, the budget is a primary consideration.” Often, budget considerations in conjunction with the issues listed above lead a client to the streamlining options below.

Moving to the Cloud

As you know, transitioning to the cloud has become a popular choice in recent years, particularly for an enterprise with budgetary concerns. Typically, it entails the reduction of your own IT department in order to shift some or all of your existing data storage needs to an off-site third-party provider.

Despite the popularity of the cloud, many business leaders opt to retain some infrastructure in-house and utilize a hybrid approach. Isaak sees a multitude of strategies in his consultation work: “What is the level of reliability and redundancy that they need, in a cost-effective manner? Again, it all comes down to the cost. What is the cost of the service versus the risk of the reliability of the service?”

The Edge Data Center

Another “on-trend” data center strategy is the establishment of “edge” data centers. Interestingly enough, the edge data center has become popular as a direct result of the cloud. Microservice architectures allow streamlining as a certain portion of a business’s applications are moved to the edge of the network.

Tom Bittman writes that the agility achieved by the cloud is only restricted by two physical limitations: the “weight” of the data, and the speed of light. In contrast, an edge data center moves processing back closer to the end user and eliminates latency. The edge DC trend also translates to a significant increase in the number of data centers.

Corporate entities, in particular, are looking at the edge setup to determine if it is a good fit. In the corporate world, Isaak says, an edge DC is either a backup to an unreliably large network, or it is solving the high cost of a large network. Originally used primarily by global content providers and telecommunications companies, its impact is now spreading.

Micro Data Centers

Like ripples in a pond, the edge market is creating new demand for the micro data center. As the name indicates, a micro data center is small and usually contained within a standalone rack, complete with cooling, security, and an incorruptible power supply. This modular server system can be shipped and installed fully assembled.

The racking system utilized within a micro data center minimizes its physical footprint and creates a more eco-friendly setting for data storage and processing. It does far more, however, than just eliminating cable clutter. One Florida solutions provider asserts that companies looking for fast growth are opting to move to the cloud, but businesses experiencing steady growth are often opting for edge and micro data center solutions. See what Dell EMC has to say on the topic in the video below.

The Eco-Conscious Choice

IT is also on the cutting edge of creating more environmentally friendly options in IT infrastructure design. This is a change brought about by a desire to do the right thing, and by the cost savings involved.

Energy costs have exploded for data centers. “They’re energy hogs,” says Isaak. He says he is surprised, for example, by the number of data centers still running at 70℉. “It surprises me because it’s such a simple operational change— [all it requires is] to increase the temperatures slowly [and not drastically], and see if there’s any change in performance or reliability.”

Improvements in tech can allow the data center to shrink, but power and cooling concerns often remain the same. Going “green” is one streamlining tactic with big impact for DCs. “They’ve always been good candidates for implementing newer, greener technologies,” says Isaak. “The payback is much faster than if you implemented that same technology in a retail or office space somewhere, or in any other type of building.”

What is Next for the Data Center?

What is ahead in 2018 and beyond? Isaak says data center operators will be feeling more pressure as the level of service expectations rises for IT groups. Most will opt for the hybrid approach, mixing cloud and traditional DCs to find an appropriate mix based on the business or corporation’s tolerance for risk.

Other trends that will contribute to data center streamlining:

  • Higher-density equipment
  • Liquid cooling
  • Taller racks
  • Preconfigured racks
  • Layout/operating procedures

The physical footprint of servers and other equipment will continue to drop. Liquid cooling is developing quickly, and it is primarily being utilized to cool the chip layers within servers. Taller racks (well above 42U) and preconfigured racks are options Isaak sees more IT managers exploring to save space, go green, and automate processes if a company is busy deploying DCs across the globe.

The Streamlined Data Center

Doing more with less is not an original concept for the data center, but it is now exacerbated by calls for optimized data processing with diminishing geographical room. Server rack components are getting smaller, but they still contain the same or greater computing power, and it must all still be kept cool and organized.

Combined with lower IT budgets and concerns about a warming planet, the data center is getting smarter, not bigger. Isaak says that is the challenge: “Identifying the best way to configure all of our applications, all of our hardware, the network, and then the physical infrastructure to support that.”

Saving money and saving the planet are just two of the more practical perks of streamlining  data center and IT operations environments. We continue to move steadily toward a dynamic, scalable DC with capabilities far beyond the traditional siloed space.

Why Not Go Higher? The Trend Toward Taller Racks

A data center manager hears this question often: “How can we safely expand IT operations without having to move to a new facility?” One of the easiest and most cost-effective answers appears to be to move upward.

The 42U rack is a data center industry standard, but in the next few years, we expect server rack dimensions to change. As data racks become more affordable, they are also getting taller. A recent Global Data Center Rack Market report shows shipments of 48U racks have already well outpaced 42U racks, and data center rack units as tall as 51U show strong sales growth. Intel put in 60U racks at their Santa Clara data center a few years back. They went from 25,000 square feet supporting 5 megawatts to 5,000 square feet for the same amount of support.

Here at RackSolutions, data center product design and custom product design is our specialty. We’ve seen a lot of trends come and go. Our primary concern—far beyond what’s trendy—is in the creation of a data center rack that will make sense for you, the customer. The source of our inspiration often comes directly from our clients and their needs.

Any innovation that increases server capacity while still allowing access to power and cooling systems is going to be of interest to us. We are also responding to concerns regarding the smartest usage of available space. That’s why we began creating custom racks far taller than the industry standard.

Taller Racks and Maximizing Square Footage

The need for increased rack height first became apparent about a decade ago. A customer came to us with concerns about their East Coast facility. It was a large space, with a great deal of headroom over the racks. They asked us why we couldn’t go any higher. With the industry standard holding steady at 42U, we went up to 55U in our first design.

Since then, a number of clients have also requested taller racks. We usually stop at about 58U, but that is only due to shipping restrictions. The internal height of a semi is 110 inches. Once a rack gets any taller, it has to be laid on its side. This leaves a lot of unused space in the trucks. Logistically, it’s not the best use of space or money. It also means racks any taller than 58U cannot come pre-populated with equipment, which has the potential to severely impact the customer’s installation time, costs, and ultimately their bottom line.

Challenges Posed by Taller Racks

The first problem we often face is the door of the facility itself. For many data centers, the door needs to be reframed to accommodate taller racks. Equipment must also be highly specialized to get staff up to the top portions of the rack safely. Finally, there is the cooling issue. How does the client circulate cool air that high?

We’ve come up with a number of solutions to address these issues. Data center personnel often place lightweight components near the top of supersize racks. Components such as switches, patch panels, and fan trays do not require frequent access. Servers and heavier equipment remain at the bottom, which increases rack stability.

Most data centers are built on raised flooring, on 24×24 panels. Clients add grates for directed airflow, and we supply baffles to send cool air back downward. Directing conditioned air properly is a major consideration when taller racks are installed. Airflow must often be increased in the data center before new racks are placed and IT equipment is rearranged.

The hot-aisle/cold-aisle configuration is another solution we see frequently. Cabinets alternate two fronts and then two backs, channeling hot air away. Proper cooling techniques are particularly important with tall racks. Temperature-controlled infrastructure goes a long way in saving you from unnecessary headaches down the road.

The Tall Rack Trend

Taller racks make sense to a large number of our clients. In fact, just three years ago, racks 50U or larger made up more than two-thirds of our total sales. We expect to see an even greater number of customers coming to us in the future for customized racks of greater height.

Those who have moved ahead with installation have immediately seen the cost savings per square foot. The higher power density and the ability to pack more servers into limited space offer tremendous advantages. Those servers are becoming more powerful every year. When we speak to someone planning a relocation or a new data center, it is all about utilization of floor space and placing as many servers on each rack as possible.

It’s unlikely, however, that racks will continue to grow taller. Once you go above 70U, safety and convenience are both affected. While our racks are highly durable and meet the strictest industry standards, they are still limited by weight capacity.

If you are considering extending your server racks and taking advantage of taller ceilings, these are all issues to consider. Overall, this trend is allowing expansion for data centers in a highly cost-effective manner. We expect to see many conversions to taller racks in the near future.

Additional Information from ServerLIFT

ServerLIFT server-handling products are uniquely qualified to tackle the demands of a taller rack.

Our data center lifts include an extendable frame which can safely support servers being placed into racks up to 65U (120”) high*. Yet, when retracted, our lifts are compact enough to navigate any facility – even through standard height doors and elevators. Lightweight and rugged, the ServerLIFT data center lift improves employee safety by alleviating potential back strain and maintaining even alignment of heavy equipment.

Positioning for both hot and cold containment aisles is simple and straightforward with our RL-500™ Platform Riser. It is designed for low ceiling clearance, and will help you to navigate obstructions with ease.

ServerLIFT provides custom solutions for data centers across the world. Whatever your specifications and design needs, we can assist.

* Recently we even developed a special order model that allows operators in specialized facilities to lift and install servers to the top of 90U (nearly 14 ft.) custom racks.


ServerLIFT often invites thought leaders in the server, product solutions, and rack storage industries to contribute to our TechLIFT blog. The opinions in these blog posts are their own, and do not necessarily reflect the ServerLIFT point of view.

server-installs-level

SmartTILT™ Platform Allows for Micro-Leveling of Server Equipment Installs

Data center server and IT equipment handling solution manufacturer, ServerLIFT Corporation, announces its newest innovation for advanced positioning of equipment in the data center. Increasing variations in floors, racks, and server positions dependent on weight have created new challenges for the ServerLIFT user community. The SmartTILT Platform provides user-controlled micro-adjustment of the ServerLIFT equipment platform up or down to perfectly level any server with rack posts or attachment hardware.  

This is the second SmartTILT Platform offering by ServerLIFT. Due to high demand, a side-loading platform version of the SmartTILT technology is now available as a standard feature of the SL-350X® Hand-Cranked Lift, and on the company’s flagship model and the best-selling data center lift of all time—the SL-500X® Electric Lift.

SmartTILT Platform Provides Fine-Tuning for Server Adjustments

The new SmartTILT Platform allows the operator to change the angle of the platform by turning an adjustment screw. The adjustment screw is conveniently located under the platform away from the server equipment. Using an included removable ratchet, the platform and server angle can be changed up to .5 degrees down and 1.5 degrees (or more) up.

ServerLIFT’s Vice President of Operations, Brandon Budd, explains the advantages of a micro-leveling adjustment system available directly on the platform itself:

“We think that this is a real game-changer for the industry. With our products, data center professionals now have the freedom and ability to position their equipment exactly where they need it in all three dimensions . . . the machines themselves can lift servers up as high as needed, our Rail Lift attachment allows them to angle servers towards the rack for drop-in rail installs, and now the SmartTILT feature means that they can have their servers angled perfectly parallel to the racks. This kind of product versatility and focus on solving the precise challenges data center professionals face every day is not something you can find anywhere else in our industry.”

Put the SmartTILT Platform to Work Today

The newest SmartTILT Platform is currently available as an exclusive feature with the SL-350X Hand-Cranked Lift and the best-selling SL-500X Electric Lift. Call ServerLIFT at (602) 254-1557 to request a demo or contact our solutions team today.

(Original press release can be found on PRWeb.)

 

Data Center Migration Relocation Checklist

Data Center Relocation / Migration Checklist

Updated for 2018:

Data Center Knowledge recently identified exponential data growth as a critical challenge for the IT industry. More organizations are being presented with the idea of migration or data center relocation. Some of the key reasons a company will plan for a data center relocation include potential cost savings, the need for more physical space, and security/compliance issues. Regardless of the reasons, data center relocation is a high-risk operation and an overwhelming task to tackle.

Data center moves and migrations have become an inevitable fact of life. Modern data centers typically move three to five times, with 53% of companies expecting to do so within the next few years, according to senior project manager Shawn Simon of National Computer Warehouse Services, LLC. (NCWS).

The most common data center moves, according to Simon, involve two types of workers:

  1. In-House Staff. In-house staff may move servers daily, but they are often not prepared for the difficult and fast nature of a massive server deployment during a data center migration. They need to prepare for it in concert with professional movers, and remain involved in the planning process.
  2. Professional Data Center Movers. The professional mover takes care of the physical move, including servers that have been packed and prepared as freight, and all of the big items such as cabinets and furniture. You need to make sure you connect with an experienced partner who has extensive knowledge of the intricacies encountered during a move. Doing so can make the difference between a smooth transition and a potential nightmare.

Involving in-house staff, including management, budgeting, and facilities maintenance, can help to avoid surprises from outside your IT staff and facilitate company-wide buy-in. Early in the process, establish and practice coordinating efforts between the in-house staff and professional movers.

While all data center migration projects require some custom decisions based on the needs of your company, there are standard best practices that will make relocation easier. Here is a quick migration checklist of important aspects that should be considered before the move:

Data Center Relocation / Migration Checklist

1) Project Planning

  • For large moves, choose an experienced, certified moving company with data center experience.
  • Establish and practice coordination between the data center movers and in-house staff.
  • Develop a budget and a Data Center Relocation Blueprint, including:
    • Planning time and effort
    • New facility acquisition, evaluation, and renovation costs
    • Additional staff
    • Overtime
    • Relocation company cost
    • Risk identification
    • Contingency plan
    • Possible server replacement or diversification
    • Cooling requirements
    • Infrastructure acquisitions and modifications
    • Wiring/cabling
  • Schedule all deployment and re-installation events
  • Verify inventory of all hardware and virtual system elements, noting:
    • Equipment condition
    • Size
    • Weight
    • Serial numbers
  • Review and update the full system diagram

2) Pre-Deployment Documentation, Warranty, and Insurance Coverage

  • Review equipment manufacturer warranties
    • Current coverage
    • Possible limitations affecting installation or removal of servers
  • Verify and review internal insurance policies
  • Verify and understand mover’s insurance coverage terms and conditions

3) Pre-Server Deployment

  • Prepare the target server area
    • Network connectivity
      • Ensure Internet connectivity
      • Layout/server room diagram
      • Network cabling
      • Power management
      • Rack placement
      • VPNs
      • DNS
    • Prepare in-house deployment participants
      • Safety procedure training
      • Training session/rehearsal of the server deployment protocol, including:
        • Labeling and packing equipment
        • Cables
        • Rails
      • Pair experienced partners with first-timers
      • Remind staff of availability and importance of the data center lift for server:
        • Installation/removals
        • Transportation
        • Positioning
      • Arm leaders with program timelines and server room diagrams
      • Advise staff and clients of upcoming system downtime
      • Schedule project manager to work onsite from start through sign-off

4) Preparing In-House Hardware and Software

  • Review and update diagrams and lists for each rack
    • Verify in-cabinet physical availability
    • Verify safe stored backup copy
  • Verify 100% backup of virtual assets
  • Identify and schedule upgrades to perform during migration
  • Inventory all hardware and virtual system elements
  • Identify and remove unnecessary abandoned cables
  • Charge and inspect server lift
  • Verify truck availability
  • Verify availability of impact, moisture, and other hazard-resistant packing materials

5) Execution of Server Deployment

  • Mirror power requirements when changing cabinets
  • Shut down servers, storage, and networking devices according to established protocol
  • Inspect, clean, repair, and re-inventory all items prior to reloading racks
  • Project manager sign-off on hardware list and scheduled tests once all items are deployed and inventoried

Conclusion

Fortunately, while the actual move is fast and furious, it is also short-lived. Most of the effort lies in effective planning. Help yourself and your coworkers to avoid as much stress as possible by investing time and effort in collaborative planning. Keep in mind that skillful coordination and cross-device collaboration will minimize potential difficulties that could arise. Bringing in a specialized consultant or migration coordinator for the project can help your team avoid common pitfalls.The payoff will be well worth it.

Of course, you will keep safety at the forefront during the entire process. A safe move is a smooth move, which, in turn, reduces the risk of downtime, injury, or damaged equipment. And start early – it’s worth taking the time to do it right.

serverlift vs. racklift functionality

ServerLIFT vs. Racklift – Comparison of Functionality

This is the first installment of an ongoing series examining data center equipment. We will take a look at the stark differences between ServerLIFT machines and other devices, and assess how they function as server handling tools.  Our first comparison is of ServerLIFT vs. Racklift. The comparison is categorized into the 3 essential functions of a server-handling device:

  1. Transportation
  2. Positioning
  3. Installation/Removal.

***It should be noted that “general-purpose” lifts —those not designed specifically for data center use—are not able to handle all three functions as described. Additionally, some lifts marketed as “purpose-built” do not effectively solve all 3 problems, exposing their users to unnecessary risks.

To counteract any false information provided elsewhere, a research team compared how ServerLIFT and Racklift data center lifts perform in a series of tests. That study was conducted by the Product and Competitive Testing team at Arizona State University (with input from Industrial Design and Engineering teams).

Here were the key characteristics of a data center lift that were analyzed in the ASU study:

  • unit height and width
  • platform reach
  • floor clearance
  • mechanical safety
  • engineering
  • ergonomics

(This evaluation is model non-specific—it applies to all ServerLIFT models and Racklift models equally, whether one relies on manual hand-cranking or an electric motor, for example.)

The following video describes these differences of ServerLIFT vs. Racklift devices, and the paragraphs below go into more detail:

 

Function #1 – Transportation ServerLIFT vs. Racklift

Speed

A data center lift must move efficiently for server installation. From starting point to the target, the Racklift is slower and more cumbersome. A ServerLIFT device moves through corridors 25% faster.

Navigation

A properly designed data center lift must maneuver down narrow aisles and turn smoothly around corners. The Racklift RL600 series requires a wider aisle (48 – 60” [121 – 152 cm]) for maneuvering and cannot turn smoothly around corners. The ServerLIFT unit maneuvers comfortably in a narrower 36” (91 cm) aisle and can turn corners smoothly.

Access to Racks on Both Sides of the Aisle

Because most data centers have narrow aisles, the lift should be able to access server racks on both sides of the aisle without the need to rotate the device. With the Racklift device, servers can only be loaded in (or slid out) from the front, forcing operators to rotate the device to face and approach the rack. In order to work on both sides of a server, operators must therefore squeeze between the cabinets on the other side of the aisle and the lift. To then work at a rack on the other side of the aisle, the Racklift needs to be turned 180° the other way. (which is not always possible, depending on aisle width)

The ServerLIFT “Easy Glide” platform allows side-to-side installation, which gives the operator access to the rack on either side of the aisle. A ServerLIFT device never needs to be turned around for the operator to switch and work on the other side of the aisle.

racklift aisle access

With Racklift, there’s only rack access on one side of the aisle

serverlift rack access

With a ServerLIFT device, you can access the rack via both sides of the aisle due to the gliding shelf

 

Fitting Through Doors & Entryways

Data center lifts should be able to move equipment from one room to another through standard door frames and elevator entryways. Racklift units measure 82.75” (201 cm) tall, so they cannot fit through standard doors and elevator entryways that tend to measure anywhere from 78 to 82 inches (198-208 cm) high. To compensate, you’d need to tip the lift to move it through, risking serious injury.

ServerLIFT units measure 69.5 inches (176.5 cm) high with its tower fully retracted (the SL-1000X model is 78 inches or 198 cm), so it’s able to pass through both standard door frames and elevator entrances with room to spare.

serverlift doorway access

ServerLIFT devices fit through doorways

racklift doorway

Racklift cannot fit through standard doorways

 

Operator Observations

In the ASU study, both test operators found the Racklift difficult to navigate. As the report states, “Driving the RackLift was much harder for the two users. They had difficulty turning, stopping and braking the lift. The visibility was decreased significantly when the server was added and the handles were not very useful.”

As for the ServerLIFT unit, maneuvering it “was generally easy for both users except for some minor details.”

Clearing Obstructions

A data center lift must be able to navigate over obstructions without damaging equipment or risking injury to the operator. The Racklift has a clearance of only half an inch (1.25 cm.) This low clearance prevents it from safely passing over power cord channels, ramps, and door thresholds, even when it is not loaded. This makes it likely to tip over, putting the onboard server, the operator, and surrounding equipment in serious danger.

The ServerLIFT device, with nearly a full inch (2.5 cm) of ground clearance, safely passes over all types of obstructions, when loaded or unloaded, without tipping.

racklift clearance

Racklift clearance of only half an inch (1.25 cm.)

serverlift clearance

ServerLIFT clearance of nearly a full inch (2.5 cm)

 

Function #2 – PositioningServerLIFT vs. Racklift

Placing Servers into Racks

The ideal data center lift should help to install servers and other equipment into any rack and every rack unit. The RackLift device only reaches to the top of standard 42U racks.

On the other hand, with its extendable tower and modular platform accessories, the ServerLIFT data center lift can safely support devices up to the top of a 62U rack (112 inches, or 284.5 cm).

racklift height

RackLift device only reaches to the top of standard 42U racks

serverlift height

Serverlift device reaches top of 62U racks

Server handling lifts must also maintain a level platform. Post-to-post alignment and angled installations for slotted and drop-in rails is also required. Racklift’s extending shelf positions equipment in the rack but cannot adjust the angle of the server. The operator must do so manually, both for side-to-side alignment and for drop-in rails. This is made even more difficult by the Racklift frame, which places a tech at high risk for pinched fingers or pulled muscles.

Only ServerLIFT devices offer control over the alignment of servers. Any ServerLIFT device can angle equipment into slotted and drop-in rails using the RS-500X Rail Lift.

racklift safety

Racklift’s extending shelf positions equipment in the rack but cannot adjust the angle of the server

serverlift installations

Any ServerLIFT device can angle equipment into slotted and drop-in rails

 

Function #3 – Installation/RemovalServerLIFT vs. Racklift

The 3rd essential function of a data center lift is to assist with installing and removing servers in a safe and efficient manner. Both the ServerLIFT and RackLift provide physical support for devices into and out of server cabinets.

However, the Racklift falls short in a number of associated categories, including operator access, stability, and support.

Access to Server During Install

There should be clear access to the server during installation into the rack. On the Racklift, this is not the case. The server is placed inside a four-post frame. This frame, along with stabilizing straps and the winch, obstructs or completely blocks visibility and access, forcing the operator to reach inside the frame to perform a dangerous server installation or removal.

ServerLIFT devices provide completely clear and safe access to the server during the installation process. Rather than housing the server in a semi-enclosed frame, the ServerLIFT platform supports the server forward and clear of its single vertical mast and lifting mechanisms, which are at the rear and out of the way. This leaves all sides of the server open, unobstructed, and available to the operator.

racklift access

The Racklift device obstructs or completely blocks visibility and access, forcing the operator to perform a dangerous server installation

serverlift access

ServerLIFT devices provide completely clear and safe access to the server during the installation process

Lift Stabilization During Install

Data center lifts must be stabilized for safety at all times while equipment is being lifted, removed from or installed into racks. Because lifts are on rolling wheels, if they aren’t well-secured, the lift will move when equipment is sliding on or off of the platform, creating serious danger for the operator and the equipment.

To secure a Racklift, the operator must spend time strapping the device to the cabinet at four different points and applying the brake locks attached to the two rear wheels. The Racklift is dependent on the rack for support. The rack itself is often only secured to other racks in the aisle, and is filled with expensive servers. Without a rack, the Racklift and its equipment are in constant danger for rolling or tipping. This is why the Racklift is always shown being used with more than one person – one person is needed to stabilize it, and one to operate it.

racklift secure

Without a rack, the Racklift and its equipment are in constant danger for rolling or tipping. This is why the Racklift is always shown being used with more than one person.

serverlift stable

The ServerLIFT device remains independently stable, and it will not move at all, with the brake on

With a ServerLIFT device, securing the lift requires the application of a single brake. The machine is locked down and rear wheels are lifted off of the floor. With this feature, the ServerLIFT device remains independently stable, and it will not move at all when heavy servers are slid on or off it, providing constant, steady, reliable support. The brake pedal is large, easy to engage, and fully accessible at all times at the back of the unit.

Server Stabilization During Install

Both RackLift and ServerLIFT devices provide horizontal shelf support into the rack, and RackLift even goes as far as providing an additional 14 inches of support. However, that extra shelf support length comes at the cost of extra device width, making it difficult to use in an aisle narrower than 60 inches (152 cm) and impossible to use in increasingly common 36-inch aisles.

ServerLIFT’s built-in Easy Glide Shelf adds 6 inches of lateral movement to the left and right into the rack, allowing operators to walk around the unit and work comfortably even in aisles as narrow as 3 feet wide.

ServerLIFT vs. RackLIFT : Weight Capacity

RackLIFT states that its RL600S hand-cranked lift has a greater weight capacity at 600 pounds (272 kg) than the 350 pounds (158.7 kg) capacity of the ServerLIFT SL-350X hand-cranked device. This does not tell the whole story. First, lifting servers with a weight over 300 pounds (let alone 600 pounds) by hand cranking requires a tremendous amount of arm and shoulder strength. It is difficult work, and the amount of both effort and force risks injury to the operator.

That is why ServerLIFT rates all of its server-handling solutions appropriately. We offer data center lift options in 500-pound (226 kg) and 1,000-pound (454 kg) capacities with electric winches, not the arm and shoulder of a data center technician. The ServerLIFT SL-350X device that Racklift compares to its RL600S model was designed for a 350-pound weight limit because, as a manual hand-crank lift, it shouldn’t be used to lift greater weight. Manual hand cranking above the 350-lb. limit poses inappropriate levels of physical strain, even for occasional use.

racklift crank

With Racklift, lifting servers with a weight over 300 pounds (let alone 600 pounds) by hand cranking requires a tremendous amount of arm and shoulder strength, risking injury to the operator

serverlift operate

The ServerLIFT SL-350X device was designed for a 350-pound weight limit because manual hand cranking above the 350-lb. limit poses inappropriate levels of physical strain

 

When choosing a data center lift, make sure that you choose a device that can handle 100% of the essential functions. Beware of misleading or even false claims by manufacturers that call their devices “purpose built.” A purpose-built device means that it was designed to handle all of the functional aspects of day-to-day data center operations. It cannot fall short in safely completing all tasks, forcing operators to risk an accident or injury.

To read more from ASU’s independent study, click here.

Press-Release-Edge-Award-Blog-Banner

ServerLIFT Honored as “Expert Exporter” by Sun Corridor EDGE

ServerLIFT was just honored as an “Expert Exporter” by the 2018 Sun Corridor “Economic Development for the Global Economy” (EDGE) Program. On April 27th, the Maricopa Association of Governments (MAG) presented the honor to the data center lift manufacturer. MAG serves as the regional planning agency for the metropolitan Phoenix area.

MAG assistant director, Amy St. Peter, notified ServerLIFT CEO, Ray Zuckerman, of the honor. “The goal of the EDGE Program,” she wrote, “is to promote and support businesses active in international trade.”

ServerLIFT exports its purpose-built server handling devices to more than 60 countries. Zuckerman commented that the corporation’s newly earned title as an “Expert Exporter” brings new prestige to his business. “By honoring us with the title, the Maricopa Association of Governments is recognizing our ability to build successful trade relationships in the Arizona Sun Corridor, across the nation, and around the globe.”

The Arizona Sun Corridor hosts one of the nation’s fastest-growing populations. Arizona shares 378 miles of its border with Mexico. The Sun Corridor growth and access to ten international ports within the state make it critical to the region’s export economy.

ray zuckerman serverlift sun corridor edge awards 2018

Ray Zuckerman, CEO of ServerLIFT Corp.

Jackie Meck, the Mayor of Buckeye, AZ and chair of MAG stated in an association announcement, “With more than 95 percent of the world’s population and 80 percent of the world’s purchasing power outside the United States, our future economic growth and available jobs increasingly depend on expanding trade in the global marketplace.”

The EDGE Program, created to increase exporting in Maricopa, Pima, and Pinal counties of Arizona, recognizes businesses with international sales. An independent evaluation team of international trade experts selects the recipients of its “Expert Exporter” honor.

As recipients of this year’s honor, ServerLIFT Corporation participated in the Arizona Commerce Authority and U.S. Commercial Service ExporTech bootcamp. This event is designed to help businesses expand and strengthen revenues via exports.

Businesses interested in learning more about the MAG EDGE program can visit the Joint Planning Advisory Council at jpacaz.org.

For the original version on PRWeb visit: http://www.prweb.com/releases/2018/04/prweb15449750.htm

Data Center Lift Cost and the Hidden ROI

Anyone who has used a purpose-built server handling lift in data center operations immediately understands how it provides convenience and improvements in data center safety and efficiency.

However, when purchasing a purpose-built data center lift, it is easy to miss the hidden and ongoing cost savings. To get approval for an assisted lifting device, your IT staff will need to validate the lift’s return on investment (ROI).

Operational Savings

Our customers have told us that their data center lift has positively affected their bottom line in the following ways:

Fewer Staff Members per Install

Once the IT staff begins using a server handling lift, the data center starts saving money. Instead of allocating three or four employees to help lift and steady a large server for an installation, the data center can assign one tech to do it single-handedly. The other employees can focus on other critical tasks such as software development, customer service, or network configuration. Fewer people get pulled off their assigned duties, making everyone more productive.

Data centers can avoid overtaxing their employees with cross-over shifts because one tech and a server handling lift can do the job on demand, instead of waiting for a second pair of hands on a shift change. That allows managers to cover 24-hour days and maintain uptime with the right number of employees on a shift, rather than pulling folks from other areas or other shifts to help out (often at double-time pay).

Savings from Reduced Installation Time

A server handling tool in a data center improves server installation efficiency by 300%. Techs can remove, transport, position, and install servers in a fraction of the time it takes to do it manually. Data center leaders who empower their teams with equipment handling solutions generate savings in reduced labor costs all year long.

During large-scale migrations, the savings add up quickly. Imagine the time saved from faster installations combined with the ability to transport multiple servers simultaneously.

Savings from Improved Data Center Safety and Health

Equipment handling is streamlined through the use of server handling devices. Employee satisfaction, attendance, and retention go up significantly. Operators doing their jobs with the aid of a server handling lift feel supported by their employer because they were given the right tool for the job. Research at Google showed an amazing 37% increase in productivity when the company “invested more in employee support and employee satisfaction.” Economists from the University of Warwick demonstrated that “happiness made people around 12% more productive.”

Greater Savings from Avoiding Serious Accidents

A lift prevents expensive accidents. Staff injuries mean employee downtime. Equipment damage means hardware may have to be replaced and can be offline. The entire network and related services are at risk.

Serious injuries can result in an employee filing for Workman’s Compensation. Be prepared to dedicate a bunch of time to employee claims and remediation. Furthermore, insurance underwriters use a business’ claim history to determine its experience modification factor (e-mod), according to Workman’s Comp Essentials.

When a company reduces claims, it may receive a discount on its premiums.

One of ServerLIFT’s major customers, a large military contractor, understood the potential savings imparted by a lift after a work-related injury on their grounds resulted in a lawsuit. The cost of a data center lift – or even many such lifts – was minor compared to the cost of the lawsuit, related downtime, and the operational interference it caused.

When data center staff see the economic and personal benefits associated with a purpose-built equipment lift, they encourage each other to use the lift. The culture of safety and best practices spreads throughout the workplace, distinguishing these businesses from their peers and making operations more cost-effective.

Cost Savings of a Data Center Lift in Colocation Facilities

Colocation facilities can reap both the savings and added revenue benefits when they use assisted server handling lifts for their operations. Employees and your customers enjoy the convenience of using them.

Customers at a colocation facility want to get in and out with the least effort possible. Imagine the response to a nearby colo facility that opens its doors and is completely armed with server handling lifts for their users’ convenience and safety. This gives a major advantage to the colo facility with the data center lift when compared to the facility without one.

Purpose-built equipment lifts in the data center generate greater staff productivity and savings in labor. In a situation where customers come into contact with the lifts, it can easily result in a higher conversion of leads to customers. Once your customers use the device, the word will spread. That means more customers for your facility and higher-density use of space for the operation, which reduces fixed costs per dollar of revenue.

________

Understanding and explaining the benefits of a server handling lift in the workplace goes far beyond its bullet-point list of features. It’s a worthwhile investment, not an expense. The downstream implications of a purpose-built data center lift acquisition include continually improving the convenience, safety, efficiency, and ROI for business procedures and operations.

serverlift road trip expo tour 2018

Data Center Managers Can Get Hands-On Demos of Lifts at NVIDIA GPU Technology Conference (GTC) and DCD Enterprise

ServerLIFT Corporation, which manufactures the most robust and convenient lifts for data centers, will be giving data center managers the opportunity to personally try ServerLIFT data center equipment lifting devices at two upcoming shows:

  • March 26-29 NVIDIA GPU Technology Conference (GTC) in San Jose, California. This premier conference focuses on artificial intelligence (AI) and deep learning. Visitors will learn about university research breakthroughs and the latest from AI startups and major-league enterprises. In addition, it will cover autonomous vehicles, smart cities, and virtual reality.
  • May 1-2 Data Center and Cloud Infrastructure Transformation Summit in New York. With 1,500 data center and cloud infrastructure professionals, this event will concentrate on the modern, full-stack, private cloud, software-defined data center (SDDC). The event sponsor, DataCenterDynamics (DCD) reasons that “It is no longer a given that moving workloads into public or hybrid cloud architectures will achieve higher performance and lower costs.”  

ServerLIFT also recently participated in Data Center World Global 2018 in San Antonio, Texas, a show that featured more than 1,000 exhibitors from data centers, facilities, and IT infrastructure industries. In addition, another 3,500 members of the Association for Computer Operations Management (AFCOM) participated in the event.

ServerLIFT attends shows to ensure that their products and solutions always meet the ever-changing needs of IT industry operations. ServerLIFT exhibits at these shows to give IT managers hands-on experience with the lifting equipment for themselves, and to see how these lifts make the removal, transport, positioning, and installation of heavy data center equipment far more convenient and safe.

“The data center managers who are using three techs to lift a 500-pound server understand immediately why this method is a vast improvement,” says Steve Bashkin, director of sales for ServerLIFT. “A single tech can slide a server out of a rack, move it to the next rack, lift and position the server precisely, slide it into the rack, all at the touch of a button.”

The company also attends industry events to interact with customers. “Every function of our ServerLIFT equipment has been designed using input from data center techs and managers,” says Bashkin. “The floor clearance, the ability to install servers at the highest and lowest levels, the way the operator interacts with the controls, the unique load-balancing design, and the overall safety and robustness of our server lifts have all come from input from techs and managers.”

Learn more about the upcoming events:

(Official Press Release on PRWeb)